Search results

I appreciate and understand your concern but as I have said, I will only be carrying out the electrical work once I have had the all clear from an electrician, I would not do otherwise and put my family at any danger. I am quite capable of routing the wiring myself once I know what I'm doing is...

Ah ok great. Now this is the kind of constructive information I was looking for, cheers

Its not that i didn't tell the truth, I am no liar!, I just didn't say I would have a electrician check my rough design first, which I will, then do the wiring myself and THEN get the electrician to check it all over and connect it up!...In my original comment I merely put up the diagramming in...

you sir sound a bit of an arse!...I only asked if the design looked ok, and have had some constructive criticism from most people, you not been one!...it has always been my intention to get an electrician in to have a look At my ROUGH plan, not a professional design!, before I did any work and...

do you mean your question about IZ of cable? I have had a very similar radial circuit installed in my home office, using the same sized 2.5mm cable, although this was without the spur for the lighting which from what i have researched and been told am going to use 1.5mm cable from the 3A fused...

Yes I have, he's going to check all my wiring over and then connect to the house fuse board then provide a test certificate and register with local council

Should I use a 20amp mcb in the fuse box as I'm using 2.5mm cable?

Thanks for your help :-)

The armoured cable will go to the house fuse box and be wired into a 30ma RCD

Thought it would be better than having three cables wired into the back of the socket, would it be better to just take the spurs off the sockets then like this? cheers.

Hi, Im in the middle of building a conservatory on the side of my house and am nearing the stage where I need to install electrics. Ive drawn up a radial circuit diagram of how I think I would do it. I'll install all the wiring and sockets myself then get an electrician in to check and connect...

Im in the same room (bedroom) as the radiator when the toilet is flushed downstairs in the bathroom….im guessing its just lots of air trapped in the system but havnt got a clue how to remove it, as bleeding the rads doesn’t get rid of it. Im at a loss!! oh well tried all I can think of, time for...

Noise is louder when both valves are open, its a constant sound of water going into rad, when the taps turned on or toilet is flushed its as if the water stops flowing into rad and when taps turned off or cistern refills it starts again. Bled all rads when stone cold. There is def air trapped...

The pressure is 1.2 when cold 1.5 when hot. It happens when the heating come on and noise is there constantly until the heating turns off. Its a Baxi combi boiler, not sure what model.

Hi, I had a new radiator fitted in my loft conversion and you can hear the water whooshing into it constantly and it gurgles, I have also notice the noise stops when the toilet is flushed or taps turned on downstairs! This is the only radiator in the house that does this. The boiler is in the...