Search results

Hi, i have this orange fluid leaking from the top of my worcester bosch greenstar 30i. Anyone have any idea as to where it may be coming from? Or what component it may be? Looking at the parts diagram it appears to be coming from the heat exchanger I've just replaced left & right hydraulic...

Thank you, I've found that one already fitted into the new rhs manifold (return block) So im happy where that goes, it's the piece below im not sure on. Any idea with this one please? Thanks for the help really appreciated

Looks like it may fit in the lhs manifold in the appature that the lh to Rh manifold pipe sits. Pipe seats over it but clip just off ( might be able to force it but don't want to if not correct location) New lhs manifold doesn't have one pre installed though. Doesn't look like itll go in...

Thanks, just not sure where/how it fits though?

Left part is Part of the bypass assembly and appears to be already fitted in my new rhs manifold. If anyone's looking in the future. Still not sure what this domed item is though Cheers

**Edit** Anyone know how/where this bypass pipe restrictor fits please? Only seems to be on the 30i not the 30si. Show as item 65 on the parts diagram, item 32 is already in the Return blick/rhs manifold. Does it go over that then the pipe on top? As it seems small for the hole it's in. Or...

Hi There's a balcony on the front of the house which has an epdm covering on it. It did have composite decking boards sat on lengths of timber, when the roofers did the work they've bonded strips of 7.5mm thick dimpled rubber under where the wood was laying. I now want to lay porcelain...

Hi Had some installed on a flat roof area when it first came out, I want to renew it all. Is there currently a top brand/product on the market? Reviews I Google all seem to be sponsored by a site or manufacturer so not really unbiased Thanks

Hi Trying to finish off this external bathroom wall so I can get a plasterer in to plaster a few rooms. The wall is square but the purlin above is twisted, checking with a level to get it square from the top is around 9/10mm off. IMG_20200810_104051 by Tirglas_7 posted 10 Aug 2020 at 10:52 AM...

Nice one, at least I know which way I'm turning now

I want to have the inlet & outlet on the bottom, at the min it has one at the top and one at the bottom unfortunately

Lh or Rh I mean

OK thanks Is there anyway of telling which is which with them installed?

Thanks for the replies guys. Had a go at unscrewing one of the blanks, you guessed it its not moving. Any tips on getting the original tappings/blanks out? Is it worth investing in a set of 24inch stillsons? What about heat from a heat gun or soldering torch? Doubt they've been out in a long...