Search results

Thanks for the tip. What about putting in a isolation valve and connecting to the braided hose?

I haven't. It's what's there already. There's only a small section of it which comes from an elbow to the copper which goes to the existing tap.

Need a bit of advice on what parts I'll need. I have 10mm poly connected to 15mm copper which goes to the existing tap. I want to take the old tap and copper pipe out and replace it with my new tap which has braided hose feeds. I also want to fit a ballofix fix valve of some sort...

Little update: lights are up and lookin good! Just wired it the same as how the old pendant was fitted but using a connector block for the two lives and keeping the live and switched live together. :D

Thanks for your help Westie! :D

Great! For clarity this is the new fitting. So I wire all the earths to the E terminal on the new fitting. The S/L and Live that are paired on the old fitting to the L terminal on the new fitting. The neutrals to the N terminal on the new fitting and the two remaining Lives to a...

Sorry I forgot to mention that there are two ceiling lights being controlled by the switch. The fact that there is a live with the s/l is what I'm not sure about.

Hi I want to change the current pendants for the new fittings I've bought but the set up is a little different to what I've seen online (All the lives together and switch live on its own). The new fitting only has three terminals (L, N, E) This is the current set up. Is this...