Search results

Thanks. I managed to resolve the issue. I think the problem was that the update took alot longer than specified in the manual. So after 30minutes I got worried and started reading, then set dipswitch 4 to on and restarted. Once I disabled dipswitch 4 the panel came back after a while. Then I...

This was the correct way to do it :-).

Anyone knows how I can get out of this situation? Scenario: Initiated firmware upgrade through the keypad - should take 15 minutes, half a day later the orange warning light on the main still flashes, no connectivity from cs, cloud or keypad. Is there any way to factory reset/unbrick it? Would...

The X10 unit carries recharcheable batteries, so does the Inferno :-). The Risco central unit also carries a battery in case of powerfailure.

Do I need that for security reasons or because the plug-in psu won't cut it? What does 1x6 and 1x2 core mean?

Yeah It's DC and plugs directly into the board as the manual says. But the manual also says it's parallell connected to the AC ports so I guess I should be able to charge the inferno from there shouldn't I? But won't the inferno take damage if it's specified to be 12V and the psu is 14.4V? I'm...

Nope. Afaik it's a swedish product so it ought to be cheapest in sweden :-). I haven't totally decided if it should be activated in home-mode or only in away-mode yet. I planned to put it on the ground floor and all bedrooms are on the second floor...

Yes - I'm definetely going to wear earplugs, but first of all I need to get the wiring right theoretically :-). You can get the inferno at just under 5000 SEK which is about 380 GBP or 530 EURO. I just had a break-in and while the intruders more or less where able to stay around 1-1,5 minutes I...

Ok - I think I didn’t understand that I needed to provide separate power for the inferno, I thought that the I/O module could charge the inferno in addition to triggering alarms So like this then(ignoring the tamper for now): 1) Buy a separate 12V dc adapter. 2) + 12V DC adapter -> 12V in...

Here in sweden we can buy them online and of the shelf as end-user and set them up yourself, I don't know if they send to u.k though - a few sites that sell them: www.uttag181.se www.vikinglarm.se www.alarmbutiken.com Good luck.

Thanks, but I think you're on a whole other level than me - I'm a software guy unfortunately :-(, but I would like to understand how this works. I can't deduct from the inferno manual wether it's default open or default closed, is that something that should be obvious or is the manual...

Hi - could anyone help me with the wiring to connect these two so that an alarm triggers the Intenso? http://www.owlsecurity.co.uk/W-Less%20Input-Output%20Expander+X-10%20Module%20Installer%20Guide.pdf http://www.klaxonsignals.com/images/Products/docs/datasheet/127.pdf