Search results

Yes, the plans were signed off a while ago.

Brilliant, thanks.

ok Fair enough :) And for a fire door, that gap needs stuffing with rockwool or something?

12mm fitting gap either side? That's a pretty huge gap no? Is that to allow for the opening not being level/straight?

As per title, need to construct a stud wall with an opening for a 610x1981 FireDoor (which I'll probably get someone to fit and sign off). Will buy a suitable FD30 lining at the same time, (30mm thick), but I need to know how big to make the opening in the stud wall to accomodate this. The chap...

After I spoke to a different chap from the supplier, it's sorted out. You are right - as they are, the stairs are not quite level, even though to the eye they look it. I used a tread to prop them up at the bottom and now they are level. So yes, I need to cut out the floor and notch itnto the...

Yes, I think that's what I described in my original post: this would drop them 18mm, meaning that the top step would be 14mm proud of the floor, and then this could be made up with underlay+carpet..... BUT This of course means I have to take 18mm off the bottom of the stringers, and then the...

Just took delivery of these space saver stairs, and with the stringers in place, I can see that the top step sits proud of the loft floor. It actually sits on top of it, and overlaps it by 50mm or so. I wasn't expecting this.... am waiting for a response from the manufacturer. Is this how they...

Never been a problem for me or anyone I know.

Not unusual at all. I've always done it, my parents always used to do it.

You talk as if drying clothes indoors is unusual.

I have a loft conversion in progress, I have a loft opening that is 710mm wide. The stairs are spacesavers and land into the middle of the loft. To the rear is a bathroom with stud walls etc. So I need two balustrades either side of the opening, supported on two sides. In order to make them...

As per title... I think I might need to retile my roof, as I've noticed a bit of leaking during times of extreme rainfall. The house is a mid terrace, with a loft conversion - 4 Velux windows, and celotex/plasterboard between and underneath the rafters. Does this complicate the job of re-tiling?

Hi..... wondering if anyone can help... My house has a loft conversion with 4 velux windows - 3 GGL M04 centre pivot ones, and 1 GPL M06 window. The operation of the GPL one is confusing me a bit. I understand that these are dual opening windows - they can open pivoting from the centre, like...

Decorators want easy to use cheap products that won't last forever, meaning their work doesn't dry up. Inferior modern paints are ideal for them.

In the end three of us upended it and walked it up the stairs one step at a time. Took less than 5 mins! Was much easier than I thought it would be.

My feeling was to insist on timber and this thread has confirmed my choice. Doing it from the bathroom side means removing all tiles that overlap in anyway the area under the basin, putting in the timber and re boarding and tiling. Coming from the other side of the wall, I’d need to cut through...

Lad doing my bathroom today was about to hang the wall-hung sink on the wall (no plinth). Stud wall, that he previously opened up to embed pipework, before plasterboarding and tiling. Turns out he didn't put any studs/noggins in place to take the bolts on which the sink is to be hung. I stopped...

No access to back window sadly.

Was also thinking of winching from the top. Then the only loading on the stairs would be my bath aka the fat guy!