Search results

Totally understood thanks for the help guys, anyways I'm calling a plumber in soon cause the boiler needs servicing so will ask him. How do you know if they are g3 certified? The plumber that I have called, on the gas safe website is certified for unvented cylinders, is that the same as the g3?

Anyone got suggestions?

The plumber who the builder employed, hadn't put inhibitor in the system and so there was a build up of sludge, the builder got his men to drain it and clean the rads that were full of sludge.

Ian I appreciate your help but I do not appreciate the tone you have used, as I have said before I am not experienced, I am just drawing from my knowledge, and from what I'm told, in regards to the (ABV) I was told it is a prv by the plumber. I don't know about you but I count a year old...

I had thought this as most drawings have the vent pipe after the pump. anyone else got any suggestions or could this be the issue.

In terms of the problems I'm having, do you have any advice ?

is that okay then? again sorry for the lack of knowledge

Basically, the plumber who he employed he fired apparently because he had made to many mistakes, the plumber now works independently but sometimes does jobs for him, he says that all the plumbing is fine and if I want him to check it he will charge me to call the plumber, he said if I get any...

again sorry I know I sound like a complete idiot but the builder who we had was very shady and paid off a lot of the inspection, he insists everything is installed correctly and I would need to pay for a plumber to come and see.

To be really honest I'm not so experienced in this field I have basic knowledge but with coronavirus, I can't get a plumber in, the builder also refuses to help because he says everything is correct. from what I know, and what the manual says...

and it's an unvented indirect cylinder.

new cylinder installed last year in February. and what do you mean by thermal store? it's a hot water cylinder with a pressurised cylinder(correction it is an expansion vessel) brand new installed by builder last year

Hey, so recently we have building works done by all be it a not so professional builder or his employees, we had a new cylinder installed and all new plumbing the problem I am having is: 1. When the pump is turned on regardless of whether calling for HW or CH the vent pipe gurgles, if you watch...

So we have shut the water suply off to drain the system only to find we have no drain off valve so we then triad to take the radiator of the valve but it wouldnt come so then we triad putting force and the pizpe moved fron the locksgield bilt and now water is coming out how would i drain the system

He completely drained, it he also changed two other radiators to towel radiators and extended them to different parts of the room The boiler is a ideal mexico 100 open vented system and i don't know when this was changed as the previous owners had done this Yes there is a header tank No i have...

i have turned the pump down from three to two but i can still hear air getting draged in

No there was no problem before we added the new rad the problem started about 1 or 2 weeks from it

About 4 years ago we had some person come to extend a radiator to another place in the room, ever since then we have had air buildup in the system, we have to bleed the radiators every day. We had plumbers to come and see the problem none of them knew what was going on, one of them told us that...