Search results

Many thanks, I went ahead and purchased a fan and the RF controller (apologies for incorrectly inserting the IR link), and it does indeed work in conjunction with the wall switch.

Hi all, I am looking at buying a ceiling fan which states that both an Infra-red controller and RF controller can be used for the unit. I was intending on using the RF controller in conjunction with the wall switch, meaning that the controller could be used to control the fan rotation and...

Thanks for the help, I will evaluate the options.

I was just thinking because the light can sometimes only be required for 5 seconds and other times for about 10 minutes, so I would have set the timer to about 5 minutes just as a backup in case the light was accidentally left on.

Yes there is a neutral. There is only one light on the circuit. The cable runs from the consumer unit to the switch and then onto the light.

Hi, I am currently in the process of changing a 1 way light switch which supplies a 58w Fluorescent for a time delay switch. I am looking at both electronic and pneumatic and take it that pneumatic works by the button slowly releasing until the timer progress is finished. Ideally I wanted a time...

Thanks for all the help.

The plate on the existing oven states 2.5kw so i'm assuming that it was wired incorrectly in the first place. The cooker circuit is fed by 6mm T+E from a 32A breaker. Thanks, I wasn't aware of this.

http://www.stoves.co.uk/media/549804/ST-SEB600FP.pdf These are the instructions, my interpretation was that if the oven could just be connected to the existing connection unit, then it wouldn't come under Part P, not sure if i'm wrong here.

From what I can gather from the pictures, the oven doesn't come with anything, just an empty terminal block. There are ovens on there that state plug pre-fitted so this is what made me think that this one was different. The oven should arrive on Tuesday. The instructions are very poorly...

Hi all, Currently in the process of having to wire in a new electric oven. The old oven is wired into a dual connection unit along with the electric hob. The instructions for the new oven state: For 60cm BI appliance: 1. Where a fixed connection is used, a device allowing the appliance to be...

Thanks for your help, I may consider replacing it soon as obviously 20 years is quite old anyway. Thanks again.

I have moved the door stop so the door sits flush with it when it is fully closed. However because the lock staple is surface mounted on the inside of the frame, this prevents the door from fully closing I guess? It is an old house so there could have been a small amount of damp and the door is...

Hi all, I have an internal door that has a Yale 89 nightlatch fitted. As the door is closed onto the nightlatch, if you look at the door from the outside, the hinge side of the door meets the door stop perfectly. However on the lock side, the bottom meets the door stop but there is a large gap...