Search results

First of 100% agree with @jonwmm , My alarm has all the tampers in it should (bell box, alarm panel, pir) or better is just this speaker that I do not feel requires it in my personal situation the alarm tamper to be wired in. It is fitted internally above the stairs and would require a ladder to...

My penny’s worth. Ditch any form of homehub from bt in the main mostly not up to the Job and they do update them and sometimes change things remotely. Separate you modem and router out so you don’t need a combined one. I have used for a good while the trusty bt openreach modem HG612 which...

I would hazard a guess you are being limited by the upload speed of your work internet connection or any IT magerment throttling of your device. If you are on your work Wi-fi you are already connected to the local LAN which the work can system is on. If you would use either 3G or view from any...

I don’t use a nvr myself but a dedicated blueiris server. So did you set this up with ip allocated to each camera on your network? Other than that (credit to ipcam talk) “Enter your IP of the NVR on MOzzilla browser, then go to: Network/advance settings/other/enable virtual host then it...

Log in to the webpage of the camera. You should then go to: Advancedconfig>system>service It “should” be in there. Just un-select IR

??

@sparkymarka Ok just for confirmation I have added a pic via phone app. Do I need to link the tamper out on the sonder or leave it open? I am not really worried about wiring it in to a tamper in all honesty I can’t see it would make much difference as already inside the house.

Thanks. If I was to wire the BA in to the strobe symbol input would that mean the sounder would still carry on past the bell time until the alarm was cleared.

I haven’t opened it up in ages but I’m presuming the bell outside is already in the bell icon? Is so I just tee in with it? The other connections are as I said? I do have spare zones but not sure I’m really too bothered about a tamper for this so I could just leave it unwired?

Hi there. First time poster here. I have a galaxy g2-20 Alarm panel that I wish to add the Pyronix twin alert sounder to it from here https://www.securitywarehouse.co.uk/catalog/intruder-alarm-c-36/sounders-c-36_45/internal-sounders-c-36_45_139/pyronix-twin-alert-internal-sounder-p-345.html I...