Search results

Hello again - there is an issue with my CPC order, looks like they are out of stock. Is this CC Driver compatible please? Or is the Wattage output slightly too high? (I need a dimmable one) - https://www.amazon.co.uk/gp/product/B076QHQ5HJ/ref=ox_sc_act_title_1?smid=A3P5ROKL5A1OLE&psc=1

Perfect, have gone for that - thanks for the advice, and education regarding Constant Voltage and Constant Current drivers. Thanks for the help guys, really appreciated.

Thanks. I've just done that - the head works on another working fitting, so it must be the driver. Using an electrical tester, there is live showing on the wire between the driver and the head. I can only assume the driver has gone faulty and the power it's supplying to the head is not correct...

Hi all, I live in a new build that is now 6 years old. One of my downlights has stopped working in the kitchen. I've been searching and searching to see if I can find the exact same unit but I can't find anything. Any ideas of the make/model of this please? If not, is there an alternative with...

Hi, just to add, I have more or less the same setup. In the past 9 months I have had this happen twice, I shut the door and as I walk to my car, the alarm has gone off, triggered by the Hall PIR. Never been able to figure out what caused it. Hasn't happened now for a couple months.

Sorted. SYSTEM OPTIONS > System Displays > Display When Set = Yes [01]

I think I know the answer to this and it's No. But is there a way to get the panel to show what Area is currently set/armed?

I do now! Thank you, much appreciated!

Thanks - I have a spare wire, so I am going to go ahead and connect it up to avoid blowing my face off when I have to change the backup battery in a couple years!

Thanks Bianco. Last question... What about connecting engineer hold off (PGM @ the panel > ENG HOLD @ the deltabell)? Or am I right in saying this not required as "Self Activating Engineer Hold Off" would be activated when in Engineer Menu which disables auxiliary inputs?

And the resistor should be connected to the Deltabell end, right? Not the Control Panel end.

Thanks Sparkymarka - so for completeness and for others who may find this thread in the future - like this?

Hi all, Sorry to hijack this, but thought better than creating a new thread. I've bought a Pyronix Deltabell E G2 Module to go with my Pyronix Enforcer V10. I am after some help for how to wire it up as I'm having difficulty interpreting the instructions between the Deltabell E Instructions and...

No idea, my house is a new build and I took the drawings from the developers website and edited in Photoshop.

Thanks Sparkymarka, that is mega helpful. I was lazy and stole the layout from the developers website. My kitchen design is slightly different as I have lader (floor to ceiling) units where the table is. I've hacked a more representative view in photoshop. Given this I think the PIR is still...

Hi all, I've bought a Pyronix Enforcer V10 with 4 x PIR's and 1 x Contact. I will be putting the contact on the door of my detached garage (only access), and plan on putting all PIR's in the house. I am after feedback on the best design for placement of the PIR's in my home. Pictures below...

I certainly hope so! I haven't received it yet but my understanding is the final 3 letters in the model number HikVision DS-2CD2142FWD-IWS means (I) Infrared, (W) WiFi, (S) Audio, alarm

It has WiFi :)

Thanks Bernard, that is really helpful. It sounds like it won't be the best solution then! Are there any other solutions where I can hard wire to the power from the security light? Or is my only options to plug in the CCTV PSU indoors and try and route the cable through to the camera? FYI -...

Hi all, I'm after a way to hardwire a CCTV camera by taking power from an outside 240v security light. I am wondering if there is any reason a 1A LED Driver won't work for the AC to DC conversion? The one I'm looking at is the 12w one here...