Search results

Took out shelf. Put a little shelf above to store airfryer. When hammering plug in the light in extractor flashed and there was a whirring sound briefly. I dunno if I hit a wire or the hammering vibrations. Seems ok now. The screws aren't horizontal to extractor's socket, there about 8...

I'll remove it. Just liked the shelf incase the feet slid off the brackets.

6 x100mm screws into 8mm duo plugs. This combi oven thing is so heavy I'm nervous to remove shelf. The microwave brackets rest on the back but don't touch the front of shelf

Bought these. Dunno if they're big enough for combi microwave.

Thxs for diagrams above on safe zones. Used a detector and couldnt find any voltage above the electrical sockets etc on worktop. But just in case no screws were put directly above any socket or other electric thing. One of the walls is an internal and there's a electric socket the other...

Will this do it? https://www.ebay.co.uk/p/11035259708?mkcid=1&mkevt=1&toolid=10001&campid=5338793847&mkrid=710-53481-19255-0&siteid=3&customid=scuk

Privately dm you

V5 form-

My mate reckons this is ok- and my previous link wrong as my car is a Peugeot expert mark 2- https://www.ebay.co.uk/p/11035259708 Part number- 36.410.600. He gave me part number . His van is a 2007 expert mine 2013 but he think same number. Will this work?

Isn't this that lol?

Leg off the corner of the shelf onto work surface 2 x1 or your shelf bracket- https://images-na.ssl-images-amazon.com/images/I/61hjnmm3sNL._AC_SL1500_.jpg It might hold lighter microwave floating without leg and put combi microwave underneath. Wanted bigger one off worktop though Or shall I...

Put this wood underneath in the end. Probably screw it into the top. Is this gonna work? It's a heavy appliance. Three 120mm screws in each baton

Lol

Will this do it? It's a 2013 Peugeot expert...

Really hard to turn key so wanted to get a new ignition switch barrel with key off ebay. Peugeot rip you off. Its 2013 model 2 litre I can give reg if needed. But not sure which barrel to buy? Also, didn't know which in photo below to tick

Have u got picture of brackets?

Actually didn't use detector. There's only one screw in each baton at the moment. U should be able to see them. There others are clearance holes. The screws are to the side of the plugs not directly above. Electrics usually run down so what's the issue?

Using 120mm screws as baton is quite thick but thinking the shelf might be too long currently 900mm so make 600mm so just hangs over the microwave then put another small shelf to left extractor fan for air fryer (above mess) or stick with longer shelf? Just one screw in each baton at moment...

Using 120mm screws as baton is quite thick but thinking the shelf might be too long length ways. It's currently 900mm so make 600mm so just hangs over the microwave then put another small shelf to left extractor fan for air fryer (above mess) or stick with longer shelf? Just one screw in each...