Search results

  1. A

    Gas fire isolation

    In our case the pipe is not chrome, it is 8mm copper pipe
  2. A

    Gas fire isolation

    We have a gas fire that was fitted a number of years ago by a gas safe engineer, never had an issue when serviced in the past. Today we had it serviced (different engineer) and was informed that a gas restrictor valve should have been fitted instead of a gas isolation valve!? Is there a...
  3. A

    Routing Cat6 cable CCTV

    Bump anyone
  4. A

    Routing Cat6 cable CCTV

    The camera i'm intending to install are hikvision with the backbox I will be using the DS-1280ZJ-DM21 backbox To achieve a water tight connection from the conduit to the hikvision backbox, what fittings are required? Will a drip loop be required if running horizontally? if so what fittings...
  5. A

    Routing Cat6 cable CCTV

    I thought as much :( A couple of other options I've thought of: Option 1 run conduit from location of cctv camera into soffits and then push the cable through as far as I can into the loft using the rods and then to the desired location or Option 2 run the conduit from the location of cctc...
  6. A

    Routing Cat6 cable CCTV

    Planning to install 2 cctv cameras, the camera will be fitted approx 2.4 - 2.6 metres in height, yellow circle. The camera will face towards the driveway (yellow circle) The second camera will be fitted at the rear garden The cat6 cables need to be routed to the lounge which is at the rear of...
  7. A

    Inaccurate thermostat replacement recommendations

    No it's in 2 degree increments
  8. A

    Inaccurate thermostat replacement recommendations

    The temperature on the thermostat itself
  9. A

    Inaccurate thermostat replacement recommendations

    So let's say the room temp is 18c and I set the thermostat to 18.4 the heating won't come on unless I set it to 18.8c I've also noticed when the heating is on the heating goes off before reaching the desired temp by at least 3c
  10. A

    Inaccurate thermostat replacement recommendations

    Ideal vogue boiler which has a ideal RF wireless PRT3 thermostat. It is shockingly inaccurate, it is at least 3 degrees out and doesn't display the room temperature correctly! Can anyone recommend an accurate wireless thermostat preferably one that can be controlled via an app not interested in...
  11. A

    Building fence on boundary line

    Maybe the odd 1 or 2 cyclists here and there
  12. A

    Building fence on boundary line

    Any ideas how I can determine whether the footpath is designated for cyclists?
  13. A

    Building fence on boundary line

    It's been a while, we decided to submit an application for a lawful development certificate proposed use to erect a 2m fence along the boundary line of our property. I'm disappointed to say the least but the council are stating I can only erect a 1m fence on my land which I own :( Is it worth...
  14. A

    Where would be my boundary line?

    The property was built in the 60 70s The title register has the attached pic To the left of the wall is our garden to the right/other side we want to erect a fence along the wall but wanted to know where our boundary line would be in order to ensure we place the concrete posts correctly
  15. A

    Where would be my boundary line?

    From the pic could anyone kindly advise regarding my boundary line, would it be line 1 or 2?
  16. A

    Repointing steep valley roof

    Can you elaborate a bit further please when you say push tiles up? If I've understood you correctly I'm guessing that if I go down the undecloack option it's a case of removing the old mortar (but access difficult to get to the top to remove the mortar) and it's then a case of sliding the...
  17. A

    Repointing steep valley roof

    That's an alternative option to the pointing but how about getting to the area close enough to do the job it's a tight area :(
  18. A

    Repointing steep valley roof

    Moved house recently and noticed the valley needs repointing, it's a steep roof with smooth roof tiles I've done pointing on our previous property but was straightforward and easily accessible I can't get the ladders close enough to the valley as it's a tight area. Pics attached. What would...
  19. A

    Are all grp flat roof manufacturers the same?

    I've laid down the new osb3 board but its shy of 2 inches short to the right side which means its not flush to the top of the fascia board. The existing roof was plywood which I've removed Other than cutting a 2 inch strip from the plywood, is there any other option? What would would be the...
Back
Top