Search results

Looks like after about 3 hours i have managed to sort it. my router unknown to me had the WPS settings disabled. In the configuration settings for the camera (using the cameras IP address) there is an option in advance settings under WiFi which enables a pin code to be generated. I then copied...

Sorry Sparky but forgot to mention i can view the camera in the ProControl+ App but only when the Ethernet cable is plugged into the camera and i am on the WiFi network with my phone

Thanks a lot, i'll be able to get more details when i get home.

I believe its this one picture but it only has one ring of LED's

As ever thanks for the reply Sparky. The model number is DOME-CAM/2.8. It has two leads. 1off 12v and 1off Network (Ethernet female). I dont have the cam or box with me at the moment

I have connected the camera successfully using the SADP tool and activated it. The camera seems to be working ok with the Ethernet cable attached. The problem is that i cannot seem to get the camera to connect to the wifi. My router does not have a WPS button. I have also tried connecting via...

was the streaming problem through the ProControl+ app or just when you tried to retrieve the footage from the SD card? @MattTlr

Thanks for the reply (y)

I'm thinking of installing some pyronix cameras in addition to my existing Enforcer v10. It makes sense to me to install the pyronix cameras as i'm already subscribing to the ProControl+ app. I have a few questions about the dome and cube cameras. Do the cameras continue to record to the SD...

I'm thinking of adding a couple of these along with my newly installed enforcer. Does anyone know if you can switch the IR off on these cameras ? also will they continue to record onto the SD card if WiFi connection is lost?

Thanks sparky..would this still be the case if I left out the tamper circuit? the bell box will be high up on the house. the sounder module is pyronix FPDELTAX

Hi, I thought I'd revive this thread rather than starting a new one. I have a few questions about the wired bell box. Any help would be greatly appreciated 1) can the bell box be wired with just the siren/strobe/12v+/12v-. Thus leaving out the tamper circuit altogether? Also in this case if the...