Search results

  1. D

    Double or Triple glazing for bespoke wood frame windows

    I am getting the old and rotting windows on my property replaced with bespoke hardwood framed windows. At a minimum they're going to be double glazed, but given the costs involved I am wondering whether I should go for triple glazing. If it makes any difference, the windows don't actually get...
  2. D

    Stop moss etc... building up on stone and render - biocide

    My house is in the perpetual shade in what seems to be an abnormally rainy area. As a result and keep getting moss and other flora build up on the most shaded parts and the lower couple of feet of the exterior walls. I am thinking giving them a good brushing getting whatever lifeforms I can...
  3. D

    Best way to finish internal wall of a solid stone retaining wall

    One external wall of a room in my property is constructed from solid stone but also serves as a retaining wall. The room has 2 other external walls which are not retaining walls but are also solid stone. All of the walls have been rendered in what appears to be a cement render, then plastered...
  4. D

    NHL 3.5 vs "unrated" NHL for small stone wall/foundation

    Hi, I'd like to build a very small foundation for a large wood clad log store to ensure that it is off the ground and also level. Everything else in the area is built from stone and lime mortar so I was just going to effectively built a short (<1ft) and level wall out of stone and sit the legs...
  5. D

    Joist cantilever balcony regulations

    Hi, My house has a Juliet balcony which is constructed from the internal joists that then extend out of the house acting as a cantilever on the external blockwork. This balcony needs some work and I'll basically be rebuilding all of the box section it and re-treating and then weather painting...
  6. D

    SDS Drill bits producing oversized holes for Rawl plugs

    Hi, I feel like I am missing something here. I need to drill some holes into concrete block (not Airlights) for a 10x55mm rawl plugs I am using a "Boschhammer" drill with a brand new Reisser 10mm SDS bit but when I drill the hole it's oversized for the 10mm rawl plug and when I then add the...
  7. D

    Insulating plastered rooms with insulated plasterboard

    Hi, I have a house with a cavity wall which currently has plaster applied directly to it. The house is quite old and I live in a very wet area do I do not fancy my chances with the sort of insulation that is pumped into the cavity. What I'd like to do is use insulated plasterboard on the walls...
  8. D

    Vaulting a ceiling -- what to do with the rafter ties

    Hi, The master bedroom of my house which I am slowly doing up occupies the entire width gable end of the house. The room has a flat conventional ceiling although at far right and left of the room the ceiling slops in a bit where the roof "cuts in" a little. I think this room would look and...
  9. D

    Best way to finish Teak? -- getting the right tone

    Hi, I have some cabinetry and a dining room table which have teak veneers. Both appear to have a wax finish; as if the wood gets wetted then a wax substance tends peel and ball up into a waxy mess. However one has a very vibrant Orangey colour, where as the other is a richer red tone. IMO...
  10. D

    Self levelling compound onto of existing screed self-levelling.

    Hi I have a floor that I am hoping to lay down some parquet flooring I am painstakingly in the process of cleaning block by block. The floor where I want to lay it is a concrete slab with two layers (separated by a red member - might just be thick/gloss paint) of screed/self levelling compound...
  11. D

    How to level a floor prior to laying parquet

    Hi, I have a floor a concrete floor that has had a skim coat applied to it by the previous owners. The floor is not all that level and not all that even either. I want to lay a parquet floor and as far as I can tell I have a few options. Just lay the parquet, don't worry about the subfloor...
  12. D

    Batten Wall vs Render and plaster

    Hi, I have just stripped back the plaster work on a wall that I've have performed a damp repair on. The issue i have now is that that state of the aerated concrete block (I think thermalite) is really bad. This wall originally had a render on it, that was stripped back by the pervious owner...
  13. D

    What construction method does this wall have? (troubleshooting damp)

    Hi, I am trying to determine what the method of construction is of this exterior facing wall, so I can then figure out what the possible causes of damp on the inside is. The building is an 1980's extension to a much older stone built detached property. The extension has stone on the front but...
Back
Top