Search results

thanks I have decided to do 1,2,3a for now and when I get the funds do 3b. any suggestions on the type of CU to use? also should i get the mains fuse changed to 100A? thanks

thanks all for the helpful advice :)

yes I hear you!! will get one in, just trying to figure out wether to cancel christmas!!

Any ideas what this may cost?

I agree, maybe it's best to change the lot get a large cu instead of 3 and run new cabling, thanks again

any idea of the cable I will need to run to the CUs? and do i need to get the mains fuse update as it is only 60A??

its not a rental and not sure if there is any benefit

Im not sure if there is RCD protection today, but it would be good to get that. Is it straightforward to change the CUs to one? and Im guessing I would have to run a new better cable to the new consumer unit? thanks

Distance is more then 3m..

Please pics of fuse boxes

ok let me get some pics of the CU and wiring..

the two fused switches feed 2 consumer units on another wall. So I need to update the cables going from the henley boxes to the fused switches as told by the engineer? how about the cables from the fuse switches to the consumer units? and the fuse switches themselves?

the 2 fuse boxes are feeding 2 consumer units on another wall. Like you say im not sure if I still need these and just take cables from the newly installed L&N henly blocks to the consumers?

thanks again chaps

Hi all, I have just had a new electric meter fitted and the chap told me I need to change the old rubber? wires coming out going to the old fuse type boxes (not sure what they are called). The fuse black boxes then has cables going to two consumer units on another wall. So need help with: 1...

also will just removing my stop cock and fitting a wider pipes to meter help?

i guess will going 32 mm future proof it for when they eventually change the lead on their end?

Hi guys, yes the TM chap did the test at the boundary and showed me pressure at 2 bar and flow 30l/min at the garden tap I measured and it is at 2 bar 13l/m?

Hi all, Currently have 20mm MDPE pipe coming into the property and thames water main to the outside TW stop cock is lead. Im getting 2.5 bar pressure and only 14l/min. there is another stop cock on my property from the thameswater stop cock which is also piped lead and from stop cock to water...