Search results

I've got a new Aquapanel shower cubicle which I want to tile. Do I need to use any tanking tapes or solutions on the wall surfaces before applying the tile adhesive?

Thanks ocemeer. That's what I thought.

When tiling a kitchen splashback, should you tile straight up from the work surface or use a spacer between the bottom course of tiles and the work surface?

Do you need any of that tanking tape in the corners when fitting aquapanel?

Can anyone help with this please? :( I've got some sealant for the tiles which I think needs to go on after adhesive but before the grout. If I go for a pale adhesive and grout I guess that will look best with travertine but I wondered if the heat from the fire would be an issue?

I've got a fireplace to lay with travertine tiles. Do they need a diamond wet tile cutter? What's the best adhesive/grout for a travertine fireplace? The tiles need to be sealed too, don't they (Lithofin?)?

I've used the quick dry polycell filler recently and that sands well but the others are terrible. As far as the mix-yourself fillers go, Gyproc easy fill is good stuff and I hear tetrion is good too but I've yet to use it.

Alternatively, if you're willing to pay the extra and haven't got too much area to cover (I've only seen it in 2.5 litre pots), Dulux plaster sealer works really well. It dries green so you can see if you've missed a bit. It does the business on skim plaster and I've even used it on bonding...

Separate grout is better and go for a waterproof/mouldproof. The bag will give you a guide as to how much it will cover but this can vary wildly depending on how much you gouge the dried adhesive out between the tiles. You need to remove any adhesive that will be proud of the grout. If...

You may get away with it if you paint a coat or two of waterproof PVA on the wood before plastering? The first coat seals the wood a bit and the second helps the plaster grip.

I'm no expert but have you tried rubbing it off with a dry cloth? Grout just gets more and more thinned out as you wash it off but it never really goes until you use a dry cloth on it.

Thanks Softus. I expected as much. :(

Are there any decent, effective DIY products for resurfacing enamel baths? Used some Cillit Bang :evil: on mine and it's taken some of the enamel surface off.

How about painting copper pipes coming out of a boiler?

Thanks diywhizz. Maybe I'll try a really hot sponge first.

I've got some Bal gold star tile adhesive stuck on some amtico flooring. Any tips on how to get it off please? I've scraped the worst of it off but there are still traces left in the grain of the surface. The tip of a stanley blade has some effect but it's very slow work and I don't want to...

Hi, My mum's shower cubicle has a leak and the plumber who fitted it reckons that the water's coming through the tiling rather than from the plumbing. Would regrouting and re-siliconing be enough to stop this, do you reckon? If so, is it best to hack out the old grout and sealant before...

Thanks both!

Hi, What's the best way of cutting vinyl floor tiles, particularly curves for the bottom of WC pedestals, etc.?

Thanks gcol. I used the cerafix yesterday and it was pretty good. But do you find that it doesn't go as far as it says on the tub? I did about 5 sq m yesterday and used a whole tub which is suppose to cover 11 sq m!