Search results

I removed the door, cleaned up surfaces with surgical spirit and used epoxy resin, so far so good.....the glued part doesn't get hot only warm si should be ok

That's what I thought might need to glue it back

The video was no help for my problem the vertical and horizontal part if the door on the oven side have separated, can't see how to get it back together Have to be very careful opening and closing door as the door assembly just slides and the glass falls out

Bush AG56TB door fallen off Tried for hours to get the door back on, can get the inner glass label in, but it's not secure and keeps falling out again Need some help how to refit this

Just saw your old post re a Vailant 418, I have a 418 eco tec plus installed 2009, have had some problems, still two remaining , changed the pump to a DAB Evosta 3, really quiet now amd running well, but was. Along story to get to the stage i am at, with lots of help on another forum. So did you...

Hi Just saw your old post re a Vailant 418, I have a 418 eco tec plus installed 2009, have had some problems, still two remaining , changed the pump to a DAB Evosta 3, really quiet now amd running well, but was. Along story to get to the stage i am at, with lots of help on another forum. So did...

Would really appreciate it if Alex, or someone else with a good working knowledge of Vailant boilers could assist me thanks

Ok, so are there any boiler settings to reduce the over firing at start up ? It modulated ok once stable....also what can I do about the cut out when flow temperature is 3oC above target, even Vaillant say should be 5oC.... Circulation is fine.....just installed a new DAB 3 evosta pump & its...

Hello My boiler often overshoots the target temperature, many times, when first firing up. It shuts the boiler down if the flow temperature exceeds the target temperature by 3oC, although valiant tell me it should be 5oC (any reason why this should be so ? & can it be fixed ?) I wonder if I...

Changes should be possible to the 1st diagnostic level, always write down the value before changing anything, E.G. D0 limits the KW the boiler can produce, yours is I assume 28KW, so can set this down to the minimum the boiler can produce, mine is 5KW D5 displays the target temperature, can’t be...