Search results

  1. M

    HONEYWELL V-PLEX SENSORS WITH GALAXY DIMENSION PANEL

    @GalaxyGuy I am facing issue in adding V-Plex Sensors(IS3016A-SN) with Galaxy Dimension/Flex Panel. I have tried all options, but the sensor just gives me Close Status. Is there any method we can make it work with above said panel.?
  2. M

    WINPAK Installation Failure

    Can anyone help me with this? I am trying to install WINPAK in my PC and this error keeps coming. Can someone help me please.
  3. M

    MAXPRO WITH HONEYWELL WINPAK

    Can anyone tell me how to add maxpro nvr or vms to WINPAK 4.8?
  4. M

    CONNECTING E080-10 WITH Galaxy® Dimension Control Panel 3-264

    Already tested , connected the keypad to Bus1 and keypad is working fine. Just curious to know. What would happen if we connect keypad and ethernet module in same Bus1??
  5. M

    CONNECTING E080-10 WITH Galaxy® Dimension Control Panel 3-264

    Initially I didnt have the bus cable(flying lead), it didnt come with the E080 module. So I did hard wired. And as explained earlier, LED's started blinking, assigned the IP, Subnet,Gateway in the keypad. Thought it would ping. But it didnt. So bought a flying lead from local market, but that...
  6. M

    CONNECTING E080-10 WITH Galaxy® Dimension Control Panel 3-264

    No, no keypad is working on bus1(Line1). Only ethernet module is connected there. FYI 2 keyapads are used.CP050 is the model for both. Both are connected parallelly in the port just below the port where -10 is connected(LINE2). In the ethernet port nothing else is connected,only -10 is...
  7. M

    CONNECTING E080-10 WITH Galaxy® Dimension Control Panel 3-264

    It is showing the below. Attaching the image.
  8. M

    CONNECTING E080-10 WITH Galaxy® Dimension Control Panel 3-264

    I have tried the settings which you said. Still I am not able to PING the module from my laptop. Settings done from keypad side: ip address- 192.168.1.15 subnet 255.255.255.0 gateway-192.168.1.1 Settings done for my laptop: ip address- 192.168.1.145 subnet 255.255.255.0 gateway 192.168.1.1...
  9. M

    Galaxy Ethernet Fault - Line Fail 4

    Thanks GalaxyGuy. And apologizing for posting same questions everywer. Coz really in a bad situation :P. Have started a new thread explaining the whole situation. Hope you would help me in this. Would really appreciate.
  10. M

    CONNECTING E080-10 WITH Galaxy® Dimension Control Panel 3-264

    I AM HAVING Galaxy® Dimension Control Panel 3-264 WHERE AROUND 70 ZONES ARE CONNECTED. 1 KEYPAD CONNECTED IS CP050-00-01. I WANTED TO CONNECT THE CONTROL PANEL WITH WINPAK-GX, AND FOR THAT I AM TRYING TO CONNECT THE ETHERNET MODULE E080-10. I HAVE BEEN TRYING MANY WAYS , BUT EVERYTHING SEEMS TO...
  11. M

    Galaxy Ethernet Fault - Line Fail 4

    How can I assign IP address to E080-10 module. I have tried but not able to PING. REPLY
  12. M

    Honeywell galaxy ethernet module e080-2 'S' terminal

    How can I assign IP address to E080-10 module. I have tried but not able to PING. REPLY
  13. M

    Galaxy Dimension occasional COM FAIL

    How can I assign IP address to E080-10 nodule. I have tried but not able to PING. REPLY
  14. M

    GxRemoteControl: unable to connect to panel invalid connection password

    How can I assign IP address to E080-10 Module. I have tried but not able to PING. REPLY
Back
Top