Search results

  1. C

    Wall not straight, kitchen fitting

    Hi I have recently had my kitchen extension plasterboarded ready for my new kitchen and after checking the walls one of the walls where my hob will be fitted runs out around 30mm from one side to the other over 3.6m How much of a problem will this be to keep units and worktop looking...
  2. C

    Sloping Block and beam floor.

    Hi I have a block and beam floor on my extension its 9m in length and slopes 55mm from one side to the other, I dont think the builder knew that a spirit level existed..it will have 120mm insulation and ufh and a liquid screed to finish, is there a way I can level the block and beam prior to...
  3. C

    Insulated plasterboard

    Hi all I want to fix insulated plasterboard to a pitched ceiling it as a total depth of 62.5mm, will it be OK to fix them to the rafters with 100mm drywall screws or should I be using galvinised washers with the screws? Also should the boards be tightly butted together? It will be skimmed after...
  4. C

    RSJ fitting not flush

    Hi I am having a rsj fitted thats 203 x 133 x 25 There are 2 of them one for inner and one for outer leaf they are 3.6m long. The outer leaf rsj as been fitted but I'm unsure if it's correct I was expecting it to sit flush to the outer brick work but it sits proud about 25mm to 30mm see pic, am...
  5. C

    Bi folds Gap

    Hi Could someone advise me on the best way to trim this sloping gap. I have just put the bifold in place and realised that the steel is not level! Over the 3m length it's probably around 20mm out..but once fitted how do I trim so the slope is not noticeable. The builder as done a runner so no...
  6. C

    Concrete roof tiles

    Hi I have Redland Regent size roof tiles my extension is 9m length the size is 418 x 332 mm and less interlock the size is 300mm wide. I can fit 30 tiles horizontally accounting for overhang I am still left with a gap at one side. Can I have cut tiles on just one side of the roof? And does it...
  7. C

    How long to tile a roof

    Hi How long would it take to install a breather membrane, battens and redland regent roof tiles on a 36 Sqm roof? It as no awkward angles just a lean to extension.
  8. C

    Roof membrane

    Hi this is my first post Could anyone help give me guidance on my issue, I am having an extension built my builder started work at the beginning of May and worked through till early August, with a lot of stops and starts. Probably more stops! He got the membrane and batons on then was delayed...
Back
Top