Search results

Condensate pipes been removed and run internally with a 32mm pipe, one in this picture ran up hill and it was leaking at that elbow I think hence causing the buggered pointing

Some pointing has fallen out when we first moved in and we’ve patched it for the time being. Boiler condensate pipe was running around the house and you can see it’s running up hill in this part and has been dripping here and has subsequently ******ed the pointing. Dpc is below the red line in...

Perfect thankyou, it’s been serviced multiple times and like you said just think the valve is in a awkward position

Perfect, thanks the other blue valve on the right should this be closed as currently looks open?

Got a potteron boiler, which valves do I need to open? Presuming it’s the 2 light blue ones ?

Happens most times and it’s on the hot and cold. Just on that tap

Also it’s just this tap the others in the house are fine

not long about a month or so. We recently had a water meter fit so water was off for half a day. We’ve not got any leaks anywhere and I’ve been under the floor. Could this be the cause ?

We’ve recently had a new tap fit but when we turn the hot water on it pulses/splutters ever so slightly seems to coincide with the boiler kicking in. Calms down and is normal after just wondering if this is normal ?

Condensation on felt support trays? Is this normal in winter? Been up into the loft to put the last of the Christmas decorationsr pack up and noticed on the south side of the house there seems to be a misting of condensation on the felt support trays? The insulation up there isn’t the best...

Our boiler has had a leak on the cartridge. No cold spots or anything and it’s been absolutely fine apart from this. He obviously drained it slightly to change the cartridge to stop the pressure. This is what came out. Now would you say this is okay or needs a power flush? We’ve had it serviced...

It is yes thank god

We’ve recently purchased a new house and noticed the membrane down towards the eves are wet. We have eve support trays fitted however we think that water is been soaked up off the membrane and wicking up into the loft? Does this sound plausible? As you can see the water drips onto the membrane...

Got a low profile shower tray and it’s draining just not amazingly. Thinking there may be a clog. I’ve removed the top cover by screwing it off and I’ve been left with this. Does any of this remove for cleaning ? Nothing seems obvious

We had a leak from a bathroom that was sorted in September. Been under floor with everything running and no leaks. Water meter also not moving. Now the amount of water that went down here into this area was a hell of a lot talking bath fulls so estimate at like 400 litres minimum? as the waste...

Breathable roof membrane in the bottom of gutter. Can this wick water up into the eves if the membrane is in contact with the bottom of the gutter ? You can see the staining on the underside this is wet. Water is not running above this so confident it’s around this area. This damp is all the...

Hi all Bottom 2 rows of tiles on our roof seem crooked. We’ve got an issue with the bottom row not been gauged out properly and this is now going to be rectified it’s far too close to the gutter. Roof was done way before we moved in. The row above the first just seems like this is also sitting...

How much would I be looking at for Batton replacement of the first course and eves support trays fitting on a semi detached bungalow? Just curious what sort of price guide id be looking at to gauge quotes off.

Hi all We’ve got damp on one side of our house in the loft down by the eves. The membrane is sagging just before it gets to the gutter if that makes sense. The membrane is in the gutter so I’m unsure if it’s soaking up and tracking back up inside is this plausible? The membrane doesn’t sag...

We have a pottertton combi 28 he boiler. Pressure is set at 1.5 bar. When I turn the heating on this drops to around 1/ below 1. Once the heating is on and running it’s back around 1.5/2, and when it’s completely off and cooled it’s back at 1.5 like it was before it was turned on Is this...