Search results

The leak is circled here seems a lot of ptfe tape and difficult to loosen

Hi my daughter had a leak under bathroom sink which is took a look at. Just wondered why there would be two flex leads from each tap ? ( see pictures ) thanks .

Morning everyone - looking for the best screw options to attach a mdf kitchen door to a plywood ( 18mm) carcass using a Blum hinge - thanks

Thanks any particular way ?

Hi all , trying to turn water on for washing machine ( new old house ) and this is the water pipe - it has no lever just a small screw . How do I turn water on ? Thanks

Yes that’s correct

Thanks. -I did that but pressure rises again

Hi thanks for reply - I wasn’t aware it was dangerous just thought it would not be working efficiency ? Thanks

Evening , My son had his ideal classic boiler serviced - I noticed it was high pressure at rest approx 3bar and expected it to be resolved after service it isn’t . The guy only commented that there was small leak which he fixed . Please see attached report and notice no pressure comment in there...

Evening , My son had his ideal classic boiler serviced - I noticed it was high pressure at rest approx 3bar and expected it to be resolved after service it isn’t . The guy only commented that there was small leak which he fixed . Please see attached report and notice no pressure comment in...

Evening , periodically a fuse related to downstairs sockets trips . I checked all sockets to find one indicating an open neutral using a socket tester . Will this cause the trippping ( there is never anything plugged in) if so what is the fix ? Thanks

good morning . I am looking to remove the above alarm system , has anyone experience of this and the procedure ? Thanks for any advice

I can see it’s the actual filling loop lead isolation valve thingy that needs to be closed thanks for your time anyways . Have a service on it in a couple of weeks so hopefully high pressure issue will be identified then

Ah ok I have probably misunderstood , thought you opened it to add water into boiler when pressure low and it should be off normally .

The blue one is connected to the filling loop on left and black on right . I’ve turned the blue one off ( to stop water going into boiler ) black one on right still on but is very stiff - thanks

Both valves in new property are open on filling loop and pressure high in boiler . Turned the one off on left hand side off ( will release some Water via bleeding ) other one seems very stiff . Am I right both should be off ( ie horizontal ) . What is consequence off right hand one being open...

Make sense thanks so much

Then get rid of the extra bit of copper pipe ? Thanks

Hi I needed to address a leaky flex pipe coming into toilet by replacing it . The picture shows the existing one , I expected an isolation valve but have one with an additional piece of copper pipe ? Can I just not get a longer length of flexible pipe and go straight into isolation valve ? Thanks

Yes it’s a combination boiler . Thanks for your response