Search results

I damaged the one i removed. Buggers to get out. Are you thinking the fault is with one of the sensors or the wiring between. To take them all out would create a right mess. They have been so well fit you cant tell there is a sensor in there!

I took one out from door i thought was to blame. They are an 8mm diameter tube with 4 wires. There is no plate screwed in. The tube is just set flush in the door casing. I guess about 20mm long

Guess so but how do i find it? All the wiring is buried behind architraves and plaster! By short I presume you mean the blue is touching the orange between the first and second door at some point (the door which is working is right next to the box so i assume its the first on the run) thereby...

Hi Thanks for coming back to me. They are all on the same zone (zone 2) I have zone 1 for front door and zone 3 for all the upstairs doors. The downstairs zone is all on a single wire run running in series. No return back to box. They have used telphone cable switching on the blues (both...

Essentially my downstairs zone has worked with 8 hard wired doors for years but now only one door on the circuit is working. The other 7 are just dead as if they have no sensors connetced. I can set the alarm and leave the property no problem with just a single door on the circuit armed. I am...

I have a strange problem I am struggling to resolve. My downstairs zone (timed & final door set) has stopped working on all but one door. In total 8 doors on the downstairs circuit are wired with door sensors but the system will only set on one of them the other 7 being comeptely ignored. It...

Apologies for any offence caused but it doesn't hurt to be polite. I have now read the rules!

I thought the idea of these forums was to get help and advice from people who might, and are willing, to help so why are you being so negative?

Hi Can somebody help me please? I have a Royal Cozyfire which keeps cutting out. It may do this after a few minutes or sometimes after one hour. I have changed the thermocouple (was this problem a couple of years ago) but this has made no difference. Is there anything else I should try...

Thanks to all who offered help. Problem has now been resolved. Jeff

I bought a Zanussi ZDQ695 cooker recently but cannot see the dial indicators very well. Simple question - should they be illuminated? Jeff

I bought a Zanussi ZDQ695 cooker recently but cannot see the dial indicators very well. Simple question - should they be illuminated? Jeff

_______________________________ lynda, moderator please note forum rule 1 a

I don't know how. Am I ok to email to you? [/img]

I wonder if you can help. I bought a Zanussi cooker yesterday (ZDQ695XR)which was an ex display model. All wiring is disconnected inside rear panel and I need to know which wire goes where. I have a photograph of this which I can email if anyone can help me. Regards