Search results

Hi Frank and thanks for the reply, on further investigation I have found that there is quite a lot of rot in the uprights and unfortunately think it's beyond my capabilities to do the work as it will involve cutting various types of joints that I don't have the tools or the skill to do, so I...

Hi guys, i'm thinking of revamping an old 3mx3m wood framed conservatory. I intend to replace the uprights to strengthen it a bit more, remove the single glazed windows fitted all round and replace with two 800mm x 1200mm upvc double glazed windows either side. I would also like to use James...

Thanks guys, for all your help

I did read somewhere a while back, (it may have been on here) that it is advisable to replace breakers with the same make. I'll have to take one out and compare against a Wylex at B&Q. I don't understand why the old fuses were replaced with GE breakers and not Wylex, no doubt one of you...

Sorry, I should have mentioned it's a Wylex board with GE breakers

This is the model I need, it's for a AEG 3.5Kw single oven, the manufacturers call for a minimum of 15a and a maximum 20a, I have a 30a in there at the moment. http://www.ebay.co.uk/itm/GENERAL-ELECTRIC-20-AMP-TYPE-B-3-kA-PUSH-PLUG-IN-MCB-MINI-TRIP-SMT20-639003-/371140023325

Thanks mate, will have a look

no, looks like no one does then thanks anyway RF

Hi, Does anyone know where I can get a General Electric Type B 20a (serial no:639003) mini breaker from? I've found some second hand on ebay but I would prefer a new one. Any help would be really appreciated.

Thanks for all your help, I think I'll go with the plugs and sockets in cupboard option

Thanks Andy

Can you run two appliances off of 1 20a switch? If so that would mean turning both appliances on at the same time, plugs and sockets would mean concealing in a cupboard which means they could be left switched on, and considering the fires that have occurred with certain machines, to me it's not...

Hi, I'm looking to install a washing machine and a dishwasher side by side and want to connect them to fcu's, I don't like the idea of using two of these and was wondering if a twin fcu exists, if so, does anyone know where I could buy one

Thanks, I'm just a bit concerned that expansion on the hot supply would be a problem

Hi, Can I use the regular 15mm white plastic clips used on copper pipe for a horizontal run on Speedfit plastic pipe

Hi all, I want to install a Salamander pump to my hot water system to supply the bath and shower that I have just installed in a bungalow. The hot water tank is in the airing cupboard, so a really low hot water pressure. I've got two solar panels to heat the hot water only, the hot water...

Hi Daniel, I've got a hot water cylinder

Hi, I've replaced the hot and cold bath taps with a new mixer tap, I've got good flows through both hot and cold supply, but when I try to mix both with barely a trickle, and I do mean a trickle, through the cold supply, the water flow is good but only lukewarm. Would a single check valve or...

Block

Thanks guys, there does still seem to be an element of doubt so i may have to call in a structual engineer