Search results

A few years ago, I fully refurbished my house. During that time, whilst ceilings were down, the builder replaced the joists in the attic in preparation for a future loft conversion. Plumbing and electrics were also brought up and a staircase was also fitted. All of the above was done to meet...

Cool, thanks for all the replies :)

Ah, great! A set like this: https://www.ebay.co.uk/itm/400794457397 ? Looks straight forward enough I think :)

Thanks for the replies. Yeah the windows are pretty old and in need of changing really. See attached photo. It's just a matter of replacing the hinge on that side?

I have a window that fails to close properly and was wondering if anyone here knew what could be causing it? When open, it seems to be in a normal position. When closed, the left side (especially the top part) doesn't sit flush with the rest of the frame. The right side is pretty much ok...

Anyone?

The video should work. Here's the direct link if not: As far as I know, yes, it controls the heating. When I can get the heating to come on (often after a few on/off attempts with the thermostat), that bottom valve makes a noise, as shown in the video.

Bit of an issue with my central heating this past few days, it's struggling to come on. When I turn up the temperature to trigger the heating, it often seems to fail. It's hard to say how often, because it can work fine for a few minutes whilst testing, but then minutes later, or a day later...

Well it should look alright, providing I can find a suitable filler. But I don't know what product to use. I've not seen anything really that suitable. Are there any really thick fillers that won't leave marks if it touches the stone?

Bit of an unusual one, but I have interior stone walls and am trying to find a solution to filling the gaps between the unevenness of the stone and the straight edge of the coving. Maybe I should have gotten a plasterer to make a smooth surface at the top for it to fit against, but then I'm not...

Bit of an unusual one, but I have interior stone walls and am trying to find a solution to filling the gaps between the unevenness of the stone and the straight edge of the coving. Maybe I should have gotten a plasterer to make a smooth surface at the top for it to fit against, but then I'm not...

Thanks everyone for all the replies. I fitted them today and it's all sorted, looks great :) The tape does indeed stick well, after a few minutes :)

Yeah, unfortunately it had to be beaded externally, due to the design on the back/inside. The glass is laminated, so should be fairly secure against someone trying to smash it, I was more concerned with someone trying to pry it out. If the glazing tape is as strong as you say, I guess it...

Even with the beads off? Surely you would be able to then get to the edges of the glass and pry it out? I'll attach a photo to show what I mean. That's the outside face of the door that you can see there. The beads will just go around edge. As you can see, it's pretty vulnerable if...

But wouldn't the tape just be cut from the outside? As I say, the beads are on the outside, so if they were removed, everything else would be vulnerable.

Thanks for the replies and the tip. I'll check out Eurocell when they open tomorrow, too. One thing though, it seems like the glass could be removed fairly easily, considering it's just a tape. As you say a stanley knife will cut straight through it. Is there any product that will increase...

Ah right, I didn't realize it sets hard like that. I was thinking of something along the lines of Gripfill before, but if it sets securely as you say, it sounds great. Where can it be bought locally? By that, I mean offline. I checked Screwfix and places like that, but none seem to stick...

Thanks for the reply. Is there anything else that can be used, to make it more secure? Like I say, it's beaded on the outside unfortunately, and I'm worried about security

What's the best way of fixing glazing into wooden frames? Both are externally beaded and so I want something as secure as possible to hold the glass in and make it difficult to remove. I have one double glazed unit and the other is laminate glass.

The cylinder only has one cable coming from it from what I can see and it's already connected to something. There's only one spur there. I assumed there would be a separate one too, which would be switched on when needed. The attached image, is the setup from a few days ago, prior to the...