Search results

Thanks for the catalogue the sizes will help me. Will get my calipers out and measure it. Quick response appreciated.

I had to switch of the mains water and after switch on got low pressure. After the basic checks of running water through all the taps and all apliances no improvement. so I guess the fault is the stop cock and need replacing and there is there is the problem. The house was built in 1971 and the...

Thanks cakeman. Spider and drum shaft separated. Thanks for your help.

I am replacing a noisy drum bearing on this machine I have removed the pulley and the 8 screws retaining the 4 legs of the spider. I am looking for tips on how to pull the spider off the drum shaft. Thanks for any advice. BVP

Thanks ^woody^ I guess water resistant is worth a try. BVP

After being flooded 3 times in 15months i need to do something. Internally i need to wallup several redundant access doors. please advise the best material from a waterproof standpoint. Brick, concrete block, concrete bricks. Also prefered morter mix. Externally i am considering building a...

returned from holiday with more strength and a new seal from bosch. Seal fitted and leak gone. Thanks sleepyheah and unclebuck001. Bernard Parker

The seal is item 17 1598 on the image at http://www.bpa-uk.com/boschseal.jpg Thanks.

Thanks for quick relpy. With the machine laying down on the front door, I have managed to remove the motor and pump casing after removing the base to casing screws to allow the base to be moved to give more room. One of the motor rubber suspension mounts hadnt been fixed and i guess the motor...

Thanks to your forum have been able to track down the leak to flexible seal that connects the recirculating pump body to the sump in the base of the drum. Any suggestions on how to remove this flexible seal would be welcome.