Search results

  1. A

    [b]outside tap [/b]no water coming through why?

    is the connection to the cold water pipe a self tapper? it has a handle like a basin tap but smaller?
  2. A

    hot dribbles!!!!!!!!!!

    the hot water from the upstairs basin tap and kitchen sink tap dribble water instead of blowing the bottom out of the bowl! there is a 3meter horizontal run from the cwst then a vertical drop of approx 1.5meters before entering the hwc.would fitting a pump to the pipe put enough pressure on to...
  3. A

    power shower pump what size and where to fit

    where would i fit the essex valve to on the tank i mean how close to the top cheers .
  4. A

    power shower pump what size and where to fit

    thank you for ur advice dave cheer :D :D
  5. A

    power shower pump what size and where to fit

    thank u 4 the info, there is another problem, the hot water runs really slowly. could i fit a low pressure pump on the cold water feed to the hot water cylinder. or is it not possible to have two pumps on a system. cheers.
  6. A

    power shower pump what size and where to fit

    thankyou 4 ur reply :) is there a minimum size for hot water cylinder@ also would connecting the cold about half way up the cold water tank to create more head give less chance of air locks?
  7. A

    power shower pump what size and where to fit

    hi anyone,i want to fit a pump for a shower cubicle with shower and jets,the plumbing all seems to be in good order.the cold water tank is in the attic but not directly above the shower, it will need a horizontal run of approx 3m then a vertical run to the pump of about 1m,the hot water tank is...
  8. A

    plumbing

    hi anyone, i want to fit a pump to a new shower cubicle with side jets.how do i work out the correct size of the pump i will need? the cold water tank is in the attic and will need a horizontal run of about 3meters and the hot water tank is in the airing cupboard pretty much back to back with...
  9. A

    hot water cylinder

    thank you all for your advice thats sorted that cheers :D :D
  10. A

    broken two port motorised valve

    I have a central heating system with a broken two port motorised valve! above the valve is a stop tap.will turning this stop tap off be enough to stop the water flow so that I can replace the valve ? :roll:
  11. A

    hot water cylinder

    hello i have a hot water cylinder that needs replacing. the water is heated by the immersion, there is no central heating. i cant find a tank with just a cold feed and a hot supply with a hole for a immersion. the only ones i can find is the ones with the central heating connections. can i by...
  12. A

    dpc on concrete floor

    thank you to woody, noseall and tozzy for your advice cheers chris
  13. A

    dpc on concrete floor

    what do you think would be best to use cheers
  14. A

    dpc on concrete floor

    its about 10mm deep where the hearth was
  15. A

    dpc on concrete floor

    hello does anyone know what you use on concrete floors for damp proofing. i have area 4 foot square where a fire place was and it needs filling with somthing. the rest of the floor is a bitumem looking substance about 10mm thick does anyone know what it is and where i can get it many thanks...
  16. A

    sell by date of plaster

    Cheers richard, i will get some new regards chris :D
  17. A

    sell by date of plaster

    Hi a quick question, i have two bags of multi finish the use by date was december will it still be ok to use? :?: cheers
Back
Top