Search results

Hi there it seems to be working now which has baffled me. I thought i had tried everything but hey presto! I will keep my beady eye on the situation but hopefully the prob has gone away. I'd like to say thanks to 'twgas' & 'D Hailsham' for your assistance. Many thanks chaps :D

Hi there just checked the back of the clock to confirm what you asked. The clock is set to pumped. Im sure that i tried turning both on as well but just to confirm i have just done it. Can't believe my eyes it just worked :o I just put the timer straight on without the backup battery in or 2...

Hi there i've been up to allsorts today. Firstly i returned the clock to the shop and got them to check it out.They tested it by putting a bit of flex with a live and neutral to it and trying the clock,it worked fine. I returned home and tested my original clock in the same way, hw water worked...

Just fitted new timer and still no good :( As its the same timeclock the only thing i havent changed over is the backing plate. Could this have any small effect on it? Also would i be able to check this new timeclock.If it is this i must be very unlucky! Thanks

Hi there just fitted the link and the central heating works with the roomstat. Will try fitting the new timeclock now,here goes !! Thanks

Hi there i've turned the central heating on the timer but nothing happens. I've taken the front off the roomstat and checked the voltage. I have 3 wires: red which connects to no1,yellow which connects to no3 and a blue wire which is not connected(tucked away in box behind). The voltage reading...

Hi there please accept my apologies for the late reply,i wont bore you with the story. I've done as suggested and here are my results. 1) orange 240v,white 27v,grey 0v 2) orange & white 0v,grey 240v 3)orange & white 0v,grey 240v 4)orange & white 0v,grey 240v The 1st result gave a slightly...

also my meter is on its way out but i can get hold of another one if so.

Hi there just a quick lowdown on our system.We moved in 3 years ago and had the timeclock,roomstat and cylinder stat changed.It was the old type clock so we went digital.Also we hadn't used the ch or hw so dont know if there was ever a fault before.Had a problem with the boiler which was when we...

hi there i have a problem with my heating system. The problem started with turning the ch on,I could not turn it on when the hw was on.If i turned it on the light to indicate that it was on lit up but the heating did not come on.If i turned the hw off then turned the ch on i would hear a...

Have just tried turning the room stat up to max and just the heating on,Hey presto it worked. Got the valve moving again so all seemed ok. I've had a bit of a play but am not 100% convinced i haven't got a prob still. Time clock is confusing me a bit but i will monitor the situation when the...

Hi there can anybody help me. I've tried to turn my heating on and have a problem. Normally when i turn the heating on the pump fires up. This is not happening. I've been using the hot water fine, its just this prob with the heating? Also when i turn just the heating on the mid position valve...

Hi there i have a gloworm 30 hxi boiler. I had the time clock, room stat and cylinder stat changed 6 months ago when i moved in. The setup before did not let you just have the hot water on. Now when both the hw and htg are on together the boiler is fine. But when i turn the room stat down to...