Search results

I did yes but there was a fair bit of water that came out I must admit when I took the cartridge out so I was a bit worried. I had a good look at the PCB and couldn't see any water on it. It seems to be suddenly working ok tho now strangely!

Other thing I've noticed is the pump seems to be constantly running I think ,even if I switch central heating off?

Hi again, so I managed to get the new cartridge and swap it over. Had a bit of trouble getting the old one out but all done. Only other thing I did was repressurise the expansion vessel. Only problem is I now can't get any hot water? Central heating works fine but no hot water. Any ideas what...

Thank you really appreciate your help

This looks like mine I'd say but it's a different number again?

Ok great thanks for that. So I think mine is the second version then by the looks of it. It only seems to have the square securing pin and the actuator is round. I still can't seem to find one online with that part number that looks like it tho

Hi everyone I need to replace the diverter cartridge on my vokera unica 28he but I'm a bit confused by the part number. In the manual the part number is 10025305 but it seems like it might have now changed to 20017597? I ordered one of these which was listed as fitting my boiler however it's...

Ah OK thats a shame. Are the white led on the multi colour ones as bright as the single led strips? Thanks for your help

Hi I've got led strip lights under my kitchen cabinets which are all connected together. The ones I currently have are the colour changing ones so are connected with the 4 pin connectors. I've never liked them tho as I don't like the white colour they give off as it's too blue and they are...

Just an update. I pushed the the pin in the shraeder valve to get the rest of the water out which wasn't too much more. the boiler pressure was still over 0.5 bar and no air or water was coming out, if it had failed wouldn't water be coming out until the pressure was zero? I then drained system...

In FAQ tho it says if water come out valve vessel needs replacing??

Oh really? OK I will give that a try. There is one of those fernox filters fitted down the side of the boiler can I just use that as a drain point? Thanks again for your help

I thought so unfortunately thanks for the reply. I've heard a cheaper and quicker option is to fit an external one? But I was trying to see where he could fit it and am struggling to find somewhere appropriate. There is a bit of space down the side of the boiler but the external vessels seem to...

Hi everyone, Put the central heating on for the first time and noticed the pressure kept rising from around 0.5bar to about 2.5 at which point I switched it off. Its gone back down as its cooled so I thought I'd check the expansion vessel valve to see if it needs recharging. However when...

Thanks for the advice much appreciated. I know the concrete floor is at least 2 or 3 inches thick as it has a gas pipe buried in it across the kitchen floor. Would be a lot of trouble getting under the floor upstairs as it's all wooden flooring over the floorboards. There is a cupboard right...

Hello, I did search for this but was worried information I found might be out of date. Basically I have a large shed about 13m from back of house then it's another 4m inside the house to the cupboard with the consumer unit. I would like to get some electrics to the shed at some point in the...

sorted it thanks very much

Hi. Ive got a new windows 10 tablet (galaxy tabpro s) which is all working great apart from when I print anything. Its connected fine to my brother printer and prints but everything comes out very pale both colour and black. I know its not the printer itself because if I use my old tablet to...

Hi everyone I was hoping to build a little simple bike shelter in a corner of my garden between the fence and conservatory. I was thinking of using something like this for the roof: http://www.screwfix.com/p/coroline-corrugated-upvc-bitumen-sheet-black-2000-x-950mm/27586 I've never used any...

Hi I've just bonded a wall which will be tiled ffor a shower enclosure. I've read you shouldn't tile onto bonding but should skim it first. But I was wondering is this still necessary if I am going to paint the wall first with aquaseal tanking paint before tiling?