Search results

  1. M

    Texacom or Pyronix for external / IP devices?

    What would be your go to panel for fitting external IP rated devices? Also, I know pyronix do an IP rated prox reader, but do you know if there's an external keypad / prox reader that will work with either panel, more like an access control gate pad?
  2. M

    Alarm that will trigger multiple panels?

    It's not required for insurance. It's just for our own monitoring. It's more peace of mind. It would take you an age to get in to one of these units. They were built to house munitions / high explosives, the alarm, like the CCTV we already have installed is a deterent / early warning system.
  3. M

    Alarm that will trigger multiple panels?

    Interesting! Thanks for that.
  4. M

    Alarm that will trigger multiple panels?

    OK. Here's another question. Which panels have the option of an external keypad/prox reader?
  5. M

    Alarm that will trigger multiple panels?

    Thanks for the replies to far. It's not possible to run new cables between each store a reason for having a panel at each store. The other is so they're all independent of each other. If I wanted to rent one of them out it would have it's own security system. There is no particular reason to...
  6. M

    Alarm that will trigger multiple panels?

    Hi All. Here's the situation. I have three warehouses / stores in a remote location. I want to install a panel at each warehouse. These would need to be in an external housing. But what I want to know is, is it possible to trigger another panel from another panel? SO lets say the alarm gets...
  7. M

    Hive multi-zone underfloor heating

    Not sure I follow...
  8. M

    Hive multi-zone underfloor heating

    Hi All We've had underfloor heating installed and added a multiroom thermostat and receiver. The receiver is by the manifold for the underfloor heating and turns on the pump and opens the valve. I was under the impression that the HUB would send a signal to the receiver at the boiler to fire up...
  9. M

    Texecom Connect Issues

    I've performed an update to the smartcom from within the app (logged in as engineer) and also enable the open and close alerts and it now appears to be working.
  10. M

    Texecom Connect Issues

    OK. So tried some different things If I set the alarm from the phone or panel it will show on the calendar of events on the phone, but ONLY if I'm logged in with the same user I used to arm the alarm. The calendar on the app of my wifes phone shows nothing. Now, what I find weird is that the...
  11. M

    Texecom Connect Issues

    App has stopped getting notifications again!
  12. M

    Hardie Plank Question

    Hi All The wooden weatherboard on our house has seen better days, and not been painted or replaced for donkeys! (we only moved here a few years ago) Looking to strip it all off and replace with Hardie Plank. At present it's only the 1st floor of the house that's cladded, the ground floor is...
  13. M

    Texecom Connect Issues

    Thanks Secure I Am. That worked a treat! I think the "use com port 2" was unticked before.
  14. M

    Texecom Connect Issues

    Thanks. I'll give that a go.
  15. M

    Texecom Connect Issues

    Still doesn't seem to be working. Will have to play a bit more. Would be helpful if someone could post all the com settings.
  16. M

    Texecom Connect Issues

    NO! Will try again!
  17. M

    Texecom Connect Issues

    can anyone send a screengrab of the communications option screen on wintex (arc)
  18. M

    Texecom Connect Issues

    I think it was first from keypad and rest from app, not 100% sure as it was a few weeks ago!
  19. M

    Texecom Connect Issues

    Yes, all users options are enabled and email addresses entered, no messages when logging in to the app other than the dial going round at the top and updating. Is there anything I need to check / enable in wintex?
Back
Top