Search results

Im covered by my bank, for no extra charge but as a heating engineer myself i would diagnose the problem and tell the bloke what was wrong so he can supply the part for nothing :-) this is no help to anyone might i add...

first thing i would do is check the thermisters they are always a favorite on this heap! there only a few quid to replace too Marc

oh goodness :?

sounds like a faulty microswitch but i have been wrong :D

hi there mr kirkgas could i please get a copy of your powerpoint you kind gentleman :-)[email protected]

Id be checking thermistors first, not sure why the diverter valve would make the burner heat up for 15-30 seconds?

the manual suggests Lack of burner ignition (no ignition signal from the full sequence ignition device) this is link to manual if you dont have it...

id charge about60-90 pounds time dependant

this post is comedy Gold! :o

looks like an ideal isar? if it is may be worth replacing the whole thing there rubbish!!

depends on how much you wanna pay really?if your system can cope with pumping the underfloor and not starve the rest of your system, underfloor can be pricey! i personally would stick a rad in there but its personal choice

my educated guess would be the pipes arnt clipped propperly/at all or u have a loose washer somewere could be anywere... has this been happening forever? is it from every tap eg kitchen and bathroom?

its likely you will need a new pressure relief valve if water is coming out of there, there relatively inexpensive and not difficult to change in most cases.

first thing i would check is the pressure relief pipe which will be outside the house probably at back of boiler is it dripping from there?

Possibly something to do with this weather were experienceing frozen condensate pipe maybe?

Not when you know how no!

i realise it should really be updated but the customer will not be told and there paying at the end of the day i have fully explained but sticking to there guns... if anyone could recommend a system boiler for this installation if youve fitted one before or wat have ya woud be great cheers!

i have the same problem, a customer has just moved to a new house,diverter valve was leaking had to be changed which was fine water reaching temperature at boiler but gets cold and stays luke warm at bathrooms? not been back over crimbo as they are fine for now but sounds to me like too...

if the old washing machine stand pipe has a seal of water in it it dosent need a cap on it so take it off :wink:

possible gas valve sticking, injectors oversized, gas rate could be too high, or the pilot assembly out of position. :wink: