Search results

Hi guys, first thing i am an domestic appliance engineer and gas safe registered but don't do boilers, fires and cookers only, last year we moved into our first house that has had a new boiler a bout 3 years ago, its a 28kw eco tec plus 837, now its only a small house and i believe its was...

Hi guys I am after some advice, we want to install a solid oak floor in our living room 25msq it's a concrete sub floor, we are looking at Wickes solid oak that they reccoment using it floating with clips, I'm not doing that as a friend did nd had major problems, I am going to glue it down but...

Hi Guys, have posted before, we are fitting a steel beam to removed a load bearing wall in the living room and am after some advice , its 152x152x25 Ub at 3,15m its been calculated with a bearing of 100mm, one side its going onto a pillar tied into the outside wall, thats fine, the issue is the...

Hi guys, I'm removing a load bearing wall down stares, it supports the floor joists on the 1st floor, no other loads apart from timber frame partitions, the beam is 3.15m long and its been calculated as 152x152x23UC S275 with 100mm bearing and 330mm x 100mm x 140mm pad stones, its going to need...

Hi Guys, i am after some advice to remove an arch way in the middle of two rooms , first i will explain the situation we have a end terrace two bedroom house, down stares there is currently a a hall running up the LH side to the stares with a door turning right into a dining room at the back...

Hi guys, i have a few questions, I'm building a new shed thats 5.2m x 3.6m and am looking at what to do with the roof, I'm getting priced for a professional Felt job but a mate sugested using the corrugated Bitumen sheets onto of the roof boards. i was looking at putting down 18mm OSB3...

hi guys, i have a quick question, i am building a block shed and need a window, i have found oneat the rite price(used) but its to big, it has two side opening pannels with a fixed centre, my question is can i cut off one of the side sections ? i know it will leave a lip where the panel used...

Hi guys i wonder if you can help, i currently have an old Glowworm Swiftflow 80 combi boiler in my kitchen, we are in the middle of adding a utility room off the back of the kitchen, currently the boiler vents into this new room, I am now at the stage where I need to seal the room up and get the...