Search results

Also note > https://www.amazon.co.uk/Videx-3011-Telephone-Handset/dp/B00K6G89QU

There is a UK support number on the PDF link I sent / why not give them a call and confirm compatibility. Also search ' videx ' on ebay produces other handsets which may be a better fit.

Does this help > https://www.videxuk.com/wp-content/uploads/2016/12/66250360-4KC-ENUK-V3-2.pdf

1 - If the PIR's you are fitting have in-built resistors then you simply select the values needed according to the panel you are using. The way of doing this will be detailed in the instructions for the PIR itself and typically involves moving some jumpers. 2 - If the PIR's you are fitting don't...

I am not an alarm engineer but simply put it allows a single pair of wires to control the functions of the alarm and tamper circuit respectively. Including power - each PIR therefore only needs 4 core cable to be used. Less wiring needed in the control panel etc. In an alarm system without...

Personally I use RS Components / ebay.

Sorry - meant to say you'll need to set the panel to DEOL when using resistors in this way.

I did see a need to fill the holes as personally I've not had any ' spider ' related issues. The need to change to ' normally closed ' will surely depend on the PIR's and panel combination that you are using and what is set as the default / or for each input on the panel.

If it helps - here is an example picture of one of my PIR's showing the resistors in place across the alarm and tamper terminals.

Just setting this up to replace an old Gardtec 800. I have a choice of DP or DEOL for the input wiring and I'm just wondering what method is best. I have individual 6 core cable to each of the PIR / door contacts. Any reason I should be choosing one over the other - what's the best practice I...

Gardtec 490 / End Station Dimensions H185 x W245 x D90 mm Looks like a suitable candidate from a size perspective - let me invesitgate a little further. Thanks for the help all.

G2 is 300 x 255 x 155mm :(

Thanks Sparky but.............. Size 305mm x 265mm x 75mm for the :- Texecom Premier 24P Poly Cased Intruder Alarm Panel up to 24 Zones

I'm looking to replace / update an ageing domestic Gardtec 800 which is used in conjunction with 8 wired zones. Due to the location of the panel I'm constrained in fitting something which is physically bigger than the Gardtec. Is anyone able to guide me based on these initial critera :-...

Thanks button is over here >>>>>>>>>>>>>>>>>>>>>>>>>>>

Should be just push fit yes, detailed diagrams should be available on the website so you can familiarise yourself before purchasing. These are also worth considering http://www.mcalpineplumbing.com/wc-connectors.html Most available from eBay / good merchants.

http://www.multikwik.com/catalogue/14/wc-connectors.html Is there anything in here that would help ?

Can you share a little more about your setup. What type of boiler / model What provides the hot water - vented or unvented cylinder etc.

No photo :(

Would Fernox LSX be worth a try - Screwfix stock it ?