adaptor

With reference to the attached picture, if the adaptor is pushed all the way down then it is around 15mm below the top of the pipe, slightly exposing the rubber seal. Of course i can lift the adaptor up so that it is level, but wonder if this movement is an issue? TIA

I need to fit a towel rail using 10mm Speedfit pipe coming out of a block wall. I was going to use corner valves with 3-part adaptors (see pics),as the wall-to-centres distance is only 50mm’ish. The issue I am having is that the adapters are such a tight fit that they are shaving bits of...

Hi All. Our joiner has just completed a TV cabinet w/ bookshelves in our alcove. Unfortunately, while he has accommodated a hole at the top (for cables) it is now no longer possible to plug any reasonably modern plug into the standard UK 2x socket as the bottom shelf sits flush underneath the...

Hello there, First time poster been driven to the site by a constant alarm notification going off in our home! 10 days ago now, my family were woken by a distant (but very noticeable) alarm noise. Not like a house alarm where decibels are high, more a constant repetition Pip Pip...Pip Pip Pip...

Hello, I am desperately trying to save an original chrome towel radiator that is nearly 60 years old and been in our family for almost that long. I am looking for an angled radiator valve - 1” male fitting into the radiator and 0.75” (but 0.5” would do) female connection into the pipes. Or an...

(I hope this query comes under the appropriate category - ie plumbing) ============================================= What has started as, and should be, a simple fix up job has not proved to turn into a troublesome. We have a shower head fixed to the bathroom wall as per photos: First...

Hi, I'm pretty useless at this but I have a cast iron rain water pipe as per the pic which has the bend part at the bottom. I wanted to connect this to a upvc pipe (as per the brown pic) and I wasn't sure what sort of connector I would need. Both pipes are 68mm and I can only seem to find...