bell

Hi. I'd be grateful for some help please. I need to turn off the power to my Texecom Premier 24 (V8.00) to do some upgrades, but I can't get the bell into hold-off mode so it goes off when I remove the power to the main panel. I think (but am not sure) that the bell is a Texecom Odyssey...

Hi, I'm trying to set up a Texecom Odysey X3 siren on a DSC PowerSeries PC1832 panel. I can't work out the wiring from the panel to the siren. The DSC has just two bell outputs: Bell + Bell - The Texcom Odysey X3 has +12v Bell Tmp 0v Strb Please can someone explain how I should connect these...

Hi, I’ve just bought a electric servants bell from eBay that was sold as working and it appears to be, however when the bell is connected (at the bottom) and you press one of the bell push switches all the flags are moved. If you disconnect the bell the flags work independently to each bell...

Hi, I have a 60Watt light near my front door which is wired to a fused spur, I was wanting to put a camera door bell like Ring and wire it to a Byron 776 which has a built in transformer and then run some flex from the transformer to the existing fused spur and run it with the outside light...

Hi there, New to the site and looking for some help replacing an existing Door Entry Handset with a Bell 801. The image below is the existing handset's internal wiring. https://www.dropbox.com/s/a9kubc7fuuflxft/1.jpg?dl=0 And the image below is the new handset that is to be installed...

Hi guys, I’m really hoping someone can help me with this My Pyronix Enforcer has stopped working properly. It began with a false alarm whilst I was out all day (pet got into living room), alarm sounded as normal - neighbour called me to let me know it was sounding. This went on for most of the...

Hey Everyone, I'm on the last part of replacing my old accenta 6 with the new Accenta Mini G4, pirs working, panel working, all tampers fine and lastly, just had to mount up and install 2 new sirens as the Accenta Mini G4 kept freezing with my old sirens. The issue I have now is with the new...

Hey Everyone, I hope someone out there can help me, basically I have an old Accenta 6 (with LED keypad alarm system) with 2 external sirens. Recently the alarm system has been triggering off randomly and has been playing up lately (keypad not responding at times, different zones triggering off...