flange

Hi, My Thermostatic Mixer shower suffers from low pressure, so I was looking to fit a Grundfos hot water pump to boost the hot water supply of the whole house also covering the solution I have a Gledhill EnviroFoam Cylinder with a 22MM Male output which is soldered onto the tank (Manufactured...

Hi, I have an issue with the hot water supply to our new bathroom which has stumped a couple of plumbers and a builder, short of spending a lot of money for something that might cause more problems. I'll try to explain it clearly and would be grateful for any ideas: We live in a 200 yr old...

Hi there. In the process of removing LOVELY pink WC. But it's cemented into clay pipe. What do I do here? The pipe is around 200mm wide so can't just cut it put a pan connector as they are 147mm. Should I keep the collar and cut away cement and cement the new pan connector in? I've got diamond...

Hi Can anyone help and advise what’s going on here please. I need to replace a HWC flange with a Surrey flange so can install a shower pump. I thought all cylinders were threaded but this one looks like it’s thread is on a stub piece that is external at the top (see photos). Any idea whether An...

I need to fit a Surrey/York flange to a hot water tank for better air removal prior to installing a Grundfos shower pump. My issue is that the tank itself has a fixed male 3/4" outlet, in to which is currently a 22mm compression fixing to the DHW supply. The flanges I've seen from Grundfos...

Hi, I wonder if anyone can answer a question for me. I'm installing a new (larger) HWC for use with a 2 bar shower pump. Plan A was to use a Surrey flange through the normal top outlet for the hot water and have the high priority feed heading to the pump (then to shower and bath) and the...