• Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.

laminate

  1. M

    Guys need your advice ! flooring advice please. Lady project

    Hi Guys, :(:( Currently wanting to relay a new laminate flooring on the upstairs bedrooms, have stripped the old laminate flooring to the floorboards which I have fixed, some were creaking which I have now screwed back into the joint timber, however I would like surface to be flat and level...
  2. M

    Line plywood board upstairs on bedroom floorboards.

    Hi Guys, Currently wanting to relay a new laminate flooring on the upstairs bedrooms, have stripped the old laminate flooring to the floorboards which I have fixed, some were creaking which I have now screwed back into the joint timber, however I would like surface to be flat and level which I...
  3. O

    Uneven floor? Help!

    I am planning to get new flooring in my bedroom. My neighbour installed laminate flooring 10 years ago and he said the reason why some planks in the centre of the room wouldn’t click into place was because the floor boards were uneven, probably due to heat from the radiator. I don’t want this to...
  4. D

    Laminate on top of Celotex

    I am going to replace an old carpet with laminate downstairs. The plan is to put some insulation under the laminate as otherwise the floor will be really cold. I will end up with the following layers: Laminate 10 or 12mm thick Celotex TB4025 insulation -- 25mm thick (would love to have more...
  5. C

    Help with laminate sub floor

    Hi, I am renovating a bungalow and am in process of doing the kitchen. I am going to lay Wickes laminate flooring and I want to know if I need to put plywood down first? The current floor is wood planks and is v level and my kitchen fitter said I didnt need ply but the guy in Wickes said it...
  6. N

    Smelly Laminate Floor

    We have an ongoing issue with an odour which we believe to be coming from our laminate floor. The floor sits on a ground floor concrete slab. In the past, we had an issue with water ingress and the original floor (engineering board?) was removed and replaced with 10mm laminate once the problem...
  7. E

    Laminate worktop joints

    Hi. We are having our kitchen installed. The worktop was installed and we have noticed that 1 joint is almost perfect (smooth) but the other one when you touch it feels up and down (not a lot but about 1mm). Also looks like little chip at the end. Buidler said that this is a fault of the...
Back
Top