led driver

I orginally posted this in electrics uk, but I think it may be more home automation based. I just wondered if anyone can give me advice or suggest a suitable replacement for a broken led driver. This was the driver in my light fitting that broke: I tried to find a replacement and found this...

I just wondered if anyone can give me advice or suggest a suitable replacement for a broken led driver. This was the driver in my light fitting that broke: I tried to find a replacement and found this on Amazon: The light switches on but I believe it is a knockoff because the eWelink app is...

Hi. I have a couple of LED ceiling lights which have two settings (daylight white and warm white) which alternate by switching them on/off quickly. My electrician fitted a new light switch while it was live and I'm pretty certain it has blown the LED light driver (pictures attached). I need to...

Evening Chums, First post on here so please be gentle... As description; I had two awful sconce lights either side of my chimney breast. I needed to re-plasterboard the wall so i took the opportunity to remove them. In their place I screwed a junction box between the stud and extended the LNE...

I want to change a couple of light fittings in our hall from Halogen to LED so we can get bright white bulbs to brighten it up a bit rather than the dull yellow halogens. The current light fittings are driven by Kaoyi KTB-60 and the fittings take 6 x 10W G4 halogen bulbs. We don't want to buy...

As some may know, I have some old disco lights what use 24V 250W lamps. I have often wondered how easy will it be to convert these to super bright LED's. For the one that has an ELC lamp in it (Geni Mojo Spin Master 1), I was thinking about getting the following...