manifolds

Hi wondering if anyone can help we have 11 zones of under floor heating which are linked to 3 separate thermostats. the plumber is different to whoever laid the underfloor so he can’t figure out which actuator / wire links to which thermostat so at the moment each thermostat heats up the...

Hi all, I currently have a 13 year old Worcester Bosch Greenstar 28i Junior Condensing Boiler installed. It's unfortunately developed a leak on the right hand side as you face it, but it's not losing any pressure and we've still got heating and hot water. I went on Checkatrade and found a...

Hi, I have a several radiators stop working and so therefore I was advised by British Gas for a Powerflush, but this actually increased the number of raditators that have stopped working. BG have effectively washed their hands of it, saying there's nothing we can do. I have tried balancing...

Hi I have a Solfex UFH system installed by my builder but without any great knowledge (used Solfex design service..) It has three zones, one of which has two loops controlled by the same thermostat and actuators on the return manifold for control. Although the Solfex design defines the flow rate...

Hi Have installed an Emetti UFH system under Agilia A screed. Two zones, 3 loops (one large kitchen for 2 loops and one utility for one loop) in a refurbishment/extension. Loops 1&2 kitchen, Loop 3 utility. It has been running for ten days now, I started at 20 C and raised to 55 C by 5 per...