riello

Hi, I recently moved to a property with an ancient Firebird Olympic 50-82. It's developed a fault where on start up the fan motor runs continuously but the burner will not proceed to ignition. It will stay in this condition until you turn it off and it does not enter lock out - the fan just...

Hi all We stupidly ran out of oil and have since refilled the tank. We know that it probably needs bled first so have been trying with no success to bleed it and reset. The first problem is we are unsure which is the bleed valve as ours looks different to every other one we've seen (it's a...

Hi. I've got an old Camray 5 Combi Boiler with Riello burner. Boiler has not been on for 6 months. Fired up today and red lockout light appears just before burner ignites. Central heating and hot water appear be working fine. Boiler does not lockout or requires to be reset. Flue appears fine...

Our Riello rdb2,2 26-33 burner won't fire up, there is no wall mounted thermostats, it is about 7 years old and our house is very thermally efficient, so there is 600 litres of oil used over a year. Two weeks ago the burner was running to heat some water without any problems. The other day when...

I have been having problems with intermittent ignition issues with this burner. It runs but no ignition. I have done some maintenance, cleaned out the boiler chamber and plates, fan and casing cleaned, burner tube cleaned, nozzle filter cleaned, all is running ok, apart from ignition. I read...

I have a faulty photocell on my boiler, my plumber friend told me to clean it when the boiler struggles to fire. It has gotten to the point today now where that no longer works. The lens has been diming for some time now, cleaning it no longer gets the boiler firing again. I have a spare one...

Hi, i was wondering if anyone can help me out with this. Recently got called to a breakdown on a Boulter Camray 3 with a Riello G5X burner. The boiler would purge, spark, and for a split second ignite only for the flame to fail. It doesn’t go into lockout, the fan continues to spin and it...

I recently had a problem with an RBL digital burner cutting out. I made a temporary replacement with a different control box and light sensor. After a few weeks it stopped running, so in desparation I put the old digital box back on! To my amazement everything works just great again! What happened?

Hope someone can help - this is my first post. We haven't serviced our warmflow oil system for quite a while. It's worked no problems for years. Yesterday it locked out. Pressed the the reset and on the second go it lit and stayed going for a couple of hours. Then tried to light again in...

Hi guys, as header. We've had a heating oil smell in the boiler cupboard fro 3 days. Today I took the Burner cover off & could see oil on the baseplate. I've tracked the leak (its 1 drip very 7 seconds when the boiler isn't firing) Its coming from the pump pressure regulator housing through...

hi, new to this so appreciate any help.have a warmflow boiler approx 6 years old fitted on my houseboat. burner is an rdb2.2 21-26. has been good and runs on kerosene or red diesel quite happily. developed a fault recently when recommisioning for the winter. having primed up new fuel, the...

Hi two questions, that would be very helpful to have answered. Questions on how interchangeable oil pumps are. Can you replace a faulty RDB pump with a Riello Mectron oil pump, and vice versa? Is there any possible way that a danfoss oil pump could be used on a RDB burner. Would be really...