self levelling screed

  1. L

    Self level over bitumen residue

    Hi, we need to self level our old kitchen floor, it's currently out of level by around 15mm. It's been scraped and used a grinder to get glue residue off it. However there is still bitumen residue which we've scraped as much as possible. From Googling it seems that ardex arditex NA is the only...
  2. J

    Screed on unknown asphalt/cement mix 1930. What to use

    I have removed my old finish floor board and came across some type of asphalt/cement mix slab 90mm thick. Black colour As this is a little bit uneven and would like to have a finish level all around the ground floor I have started to get someone to quote me for a screeding. I never thought...
  3. K

    9sqm kitchen floor needs levelling

    Hi all, So I need to level 9sqm of a kitchen that also flows through to a 19sqm reception room. Now, the kitchen starts off concrete, then goes to those ancient vinyl type tiles on what looks like a bitumen base (I’ve scraped most of these off now), then an open archway into the reception which...
  4. B

    Advice on Leveling an Asphalt floor

    I think this is going to be a tall ask, but you never know :-) Problem: We'd like to lay a wooden floor in the living room, however, it's to be layed over asphalt. Current info: 1. Floor is flooring grade asphalt in reasonable condition, ie it's not damp but the cracks have been repaired, as...
  5. P

    Replacing screed (25-40mm) and installing dpm

    I recently pulled up the screed from my floor because it was cracked and damaged from damp. So I need to replace the screed, the screed depth required ranges from 25-40mm (concrete floor is not entirely level). I've taken some pics so you can get the idea: Here, you can see the depth of the...
Back
Top