shower waste

Hi, Can somebody help identify the shower waste in the attachment please? I need to find a replacement flange and tube, but the common tube width of 63mm is too wide. I’m at a loss as to what the make could be or where to find spares. Thanks, Max

Hi All, I'm currently in the middle of an upstairs bathroom remodel and am considering whether I can move the existing soil waste pipe to the toilet to under the floor boards. The current situation is this: - Vertical stack that pops up, just under the floor - Bathroom shower 40mm feeds into...

I’m planning to connect a shower trap to the waste pipes for a new shower tray. The waste outlet is located towards the wall in the center, so the waste pipes will need a 90-degree bend. I’ll need to make a cut near the existing Tee, but I’m concerned that if I don’t get it right the first time...

I’ve dry-fitted my shower tray waste. Can anyone spot any potential issues? (Please ignore the sawdust, I’ll clean everything before the final fit.)

I’m installing a shower tray and noticed a brush icon in the instructions labeled “PVC.” Do you know what this indicates?

I’m in the process of connecting a shower tray waste and have encountered an issue. The tray is being installed on plywood, with layers of chipboard and OSB beneath it, which has raised the trap significantly. As a result, it’s not aligning with the existing waste pipes. Would it be better to...

Planning a wet room with a flush floor where the waste will run through a slab and through the wall to discharge to the drains outside. Using something like the below bottle gully, would building regs allow me to connect the shower waste underground in one of the top two 40mm inlets? As far...

The shower tray needs to fit in a three-sided recess that is 900 x 760 in size - see attached picture. It seems logical to place the waste at the front for access (where the rubber seal is), but the thing that slightly concerns me is whether it is a bad idea do you have it on the same side as...

I'm replacing a shower tray - the old one had push fit waste fittings below the floorboards. I've used the old waste pipe, but I'm a bit nervous about using compression fittings and sealing them in. They don't leak at the moment but in ten years time...? Any harm in using silicone to seal tbe...

Hey Guys! First post so please go gentle. I have recently moved into a property needing some medium/heavy cosmetic work and I am a very keen DIY'er, will get my hands dirty on any job. I just need a little guidance. I want to add a shower to the ground floor WC. I am fairly comfortable with...