solenoid

  1. F

    Triton shower no water flowing

    I have replaced an electric shower TRITON ENRICH with same model. Very straightforward job because the old onewas already connected to electrical and water supply. The reason i replaced it is because it stopped working. So I thought to buy a new identical shower unit. Basically the issue is...
  2. H

    Shower repair - solenoid coil replaced, now leaks.

    Hi all - i have a mira sprint electric shower. A week or two ago it stopped working, had power, but no water. After some research i found that a faulty solenoid coil could be a sensible place to start. I ordered the part from Mira, and fitted it and was very happy as water flowed again...
  3. C

    Locating underground irrigation valves

    Anyone got any ideas how to locate buried 2way solenoid valves (hunter)?! I have bought a house with an irrigation system. The operate via a 2 way solenoid valve. they were a bit hit and miss in operation. I have got some working by replacing valves, cleaning valves or just bleeding them. I...
  4. S

    Central heating pump repeatedly making a clicking solenoid clicking sound

    Hi all, our central heating water pump has started making a repeated clicking sound (you can hear it in this video clip https://tinyurl.com/trlcxxl for the first 10 seconds) sounds a bit like an electrical contact switching or a solenoid. This seems to happen before every time the gas boiler...
  5. I

    Shower Heater - Solenoid fails regularly.

    I have a Redring 650 9.5 kw Shower Heater. In the past year the solenoid on the water inlet valve failed, and was replaced. It happened a second time, and now a third. Before I replace it yet again can anyone tell me if there is a fault elsewhere causing this to happen. Any advice would be...
  6. G

    Solenoid valve not staying open - gas valve or PCB replacement?

    My boiler - a 15 year old Ideal FF350 - has been starting to play up: When it starts up the pilot light will ignite with a loud click, then take a long time to start the main burners, before switching off after 90 seconds or so. After another 90 seconds the sequence will start again and again...
Back
Top