• Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.

tap installation

  1. naki

    How to unscrew this kind of tap?

    I removed the two screws from the threaded brass piece (which were in the two holes on the sides). I can now twist the brass piece but the tap twists with it. I was wondering what I should do next and what tool to use. Thanks for any advice!
  2. P

    Need help to replace outside tap pipe in old house

    Hi, there is a leak in my outside tap copper pipe, I want to remove the pipe that connects under my sink and replace with a new one, do I need a blowtorch to remove the old one and what all would I need to install the new one again? I have attached a pic of the connection that goes to the...
  3. Z

    Mixer tap hot/cold connections

    Hello, I have recently installed a mixer tap + shower head set to a new bath. During the installation I had a few issues and before I fix everything finally I wanted to check I wasn't locking in any future problems. The issue stemmed from the photos/instructions not matching up with how the...
  4. R

    kitchen mixer tap won't stand straight

    I just spent the whole day replacing my kitchen sink and taps. I have a new mixer that I cannot get to stand straight. It's leaning slightly to the right, and wobbles a lot even though the sink is 0.9 gauge steel. There is a C-shaped plate under the sink holding the tap in place with rubber...
  5. D

    Reginox tap install help

    Hi all, We will be having our worktop installed tomorrow after living without a kitchen since August! I'll be clambering under the sink to install the tap, but YouTube videos seem to all have a crescent washer and bolt so I am struggling to find instructions for a similar setup... The tap...
Back
Top