2 " cistern connector

[billozz]

I have a cistern with a 2" flush outlet doughnut etc, I can't seem to find one at local Screwfix or Toolstation and wondered if there was the same? And if the one I've shown would do the job, as always really appreciate the help I get on here.

 

[CountryFan]

The photo’d one may work, but regards the Screwfix/Toolstation ones are 1.5”

 

[billozz]

The photo’d one may work, but regards the Screwfix/Toolstation ones are 1.5”

Yes thank you for the answer. that's why I'm looking elsewhere but I'm not sure whether that one will fit and don't really want to buy it without being reasonably sure

 

[billozz]

As long as it's got a 2" hole surely it'll fit? Or could the bolt holes be in a different place?

 

[CountryFan]

As long as it's got a 2" hole surely it'll fit? Or could the bolt holes be in a different place?

Yes it should fit, and they shouldn’t be that far out if at all. There is room for slight adjustment on the plate.

 

[billozz]

Yes it should fit, and they shouldn’t be that far out if at all. There is room for slight adjustment on the plate.

So if order the set that's in the photo it should be ok?

 

[CountryFan]

So if order the set that's in the photo it should be ok?

I would have thought so