- Joined
- 1 Sep 2015
- Messages
- 371
- Reaction score
- 5
- Country
I'm looking to extend my power to a Lifx Z Strip: https://uk.lifx.com/products/lifx-z, however I want this to run in the wall, and also be compatible with an standard 12v RGBW strip in the future.
I ordered from 5 core 0.3mm2 cable, however I've just noticed on the Lifx Power Supply that it outputs 24v, 1.25A 30W.
I called the supplier of the cable and their response was "You can do any voltage on it..."
Any ideas if the cable I have will be sufficient, or do I need something else?
I ordered from 5 core 0.3mm2 cable, however I've just noticed on the Lifx Power Supply that it outputs 24v, 1.25A 30W.
I called the supplier of the cable and their response was "You can do any voltage on it..."
Any ideas if the cable I have will be sufficient, or do I need something else?
Last edited: