Hi all!
We’re going through a major refit of our home, and converting from an old gravity water system with aga hot water to a direct pressure electric system. I’ve bought a Dimplex Edel heat pump hot water cylinder that is going into the loft.
It’s a cold loft with pitched slate roof.
I’m after some recommendations for inlet and exhaust vents for the heat pump system. It’s a 152mm/6” ducting system, and we need minimal resistance to keep fan speeds low.
This looks like a good exhaust option, but I’m struggling with inlets and am open for any recommendations: https://www.roofingsuperstore.co.uk...150mm-insulated-vent-terminal-tile-slate.html
thanks I’m advance!
We’re going through a major refit of our home, and converting from an old gravity water system with aga hot water to a direct pressure electric system. I’ve bought a Dimplex Edel heat pump hot water cylinder that is going into the loft.
It’s a cold loft with pitched slate roof.
I’m after some recommendations for inlet and exhaust vents for the heat pump system. It’s a 152mm/6” ducting system, and we need minimal resistance to keep fan speeds low.
This looks like a good exhaust option, but I’m struggling with inlets and am open for any recommendations: https://www.roofingsuperstore.co.uk...150mm-insulated-vent-terminal-tile-slate.html
thanks I’m advance!
