Adhesive for quartz tiles
- Thread starter larold
- Start date
Sponsored Links
I have just laid some Gulf Stone Black Opal quartz (resin comglomerate) tiles in my ensuite and did a load of research on adhesive.
Recommendation would be to use BAL PTB Flexible as it has a low water content in the mix.
Apparently these resin mix tiles can be sussesptable to cupping once laid if there is to much water in the adhesive (thats the hought of the cause anyway). Also you should use a rapid setting adhesive to help this issue.
I don't know how likely it is to experience issues with other normal adhesives, but I err'd on the side of caution when doing mine!
Adhesive manufacturers technical help line should also be able to help you, the BAL guys are really helpful.
Also, I emailed the tile manufacturers for their input.
Recommendation would be to use BAL PTB Flexible as it has a low water content in the mix.
Apparently these resin mix tiles can be sussesptable to cupping once laid if there is to much water in the adhesive (thats the hought of the cause anyway). Also you should use a rapid setting adhesive to help this issue.
I don't know how likely it is to experience issues with other normal adhesives, but I err'd on the side of caution when doing mine!
Adhesive manufacturers technical help line should also be able to help you, the BAL guys are really helpful.
Also, I emailed the tile manufacturers for their input.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
