AEG washer sticks out.

[joe-90]

My G/F has bought an AEG washer to replace her old AEG. So I swapped them over. The problem is that the new one has some kind of unit connected to the inlet valve that I guess is an anti syphon valve - but it make the washer stick out by about an inch further than it did. Shall I just put the old inlet pipe on?

 

[zipper]

Might help if you post the model & pnc number.

 

[joe-90]

It's a Lavamat but I don't know the number and the thing that sticks out is a Solenoid Triple water valve. Why do they make it so big?

 

[zipper]

Lavamat doesn't help...there are an infinite number Lavamat models. Post the pnc number that is printed on the label in the door opening.