Do I get an air separator or a combined deaerator and dirt remover ?
I was looking at the Spirovent 28mm, but spiro don’t do a combined 28mm unit
I don’t want the plastic bottle unit
Whenever I drain/refil the system I always get air trapped, it takes ages for it to clear
And now I’ve started reading about air separators I wonder if I should get a combined deaerator & dirt remover
Do I get a 28mm combined unit and fit it near the boiler or get the Spirocombi 22mm and fit it to pipework in air cupboard ?
Any advice is welcome
I have an F&E system with oil boiler and pump by the boiler,
28mm pipework up to the airing cupboard where it splits into 3 circuits
1, hot water tank indirect
2, upstairs radiators
3, downstairs radiators
There are 2 air vents fitted on the pipework in the airing cupboard
I was looking at the Spirovent 28mm, but spiro don’t do a combined 28mm unit
I don’t want the plastic bottle unit
Whenever I drain/refil the system I always get air trapped, it takes ages for it to clear
And now I’ve started reading about air separators I wonder if I should get a combined deaerator & dirt remover
Do I get a 28mm combined unit and fit it near the boiler or get the Spirocombi 22mm and fit it to pipework in air cupboard ?
Any advice is welcome
I have an F&E system with oil boiler and pump by the boiler,
28mm pipework up to the airing cupboard where it splits into 3 circuits
1, hot water tank indirect
2, upstairs radiators
3, downstairs radiators
There are 2 air vents fitted on the pipework in the airing cupboard