Alarm set

[Taetae]

Hi ive recently moved in a new house and have the C&k securitech co23-203 iss.1 how to I activate night mode???
Thanks

 

[EightyTwo]

Sorry, I am not so familiar with this panel.

But I have used this forum; look here... //www.diynot.com/forums/viewtopic.php?t=261941

 

[Taetae]

Thank you... Do you know why zone 8 keeps flashing red?

 

[Taetae]

Just realised we don't think it's working just done exit mode and listened through door and its doing a buzz tht doesn't go off

 

[sparkymarka]

it probably needs resetting code and # to reset, if 8 still flashing look for a panic button it may need resetting, to night set press code * 0.

 

[Taetae]

Thanks I will try when I get in haven't seen a panic button thou

 

[Taetae]

Hi resetting hasn't made a difference still bleeps on exit, and number 8 flashes any other ideas?

 

[sparkymarka]

does it flash when its unset ?

 

[Taetae]

Number 8 flashing yes while unset and when I try set to exit it's just beeping constantly doesn't go off like a normal alarm
After vacating house

 

[sparkymarka]

it must be a panic button check bedrooms side of beds and front and back door for panic button, or try code * 8 this may force isolate the zone on setting you will need to do this every time you set system.

 

[Taetae]

Thanks ill try this how come when we leave the property the alarm just continue beeps and doesn't set

 

[Taetae]

No didn't work

 

[sparkymarka]

because zone 8 is still open ! ! ! open control panel box ( a4 sized metal box ) remove wires in zone 8 and fit a link of wire to short out zone 8.

 

[Taetae]

I don't think a woman should b messing with wires lol the control box is tiny about small envelope size

 

[sparkymarka]

no its not. thats the keypad for the system the main box is a square metal box.