I have recently replaced the diaphragm in an Alpha CB24 diverter valve and have regained the dhw that was not working but now have no ch flow. I think i may have put the large spring on the wrong side of the diaphragm when i rebuilt it, would that give me this problem or does anyone have any other suggestions please?
Alpha CB24
- Thread starter greg3k91
- Start date
Sponsored Links
How have you rebuilt the diaphragm?
Should be:
Diaphragm 1st with small spring and spindle facing out
2nd the larger spring
Then the front brass section.
Should be:
Diaphragm 1st with small spring and spindle facing out
2nd the larger spring
Then the front brass section.
Thanks for the speedy response. I think i have put the larger spring on the side that is closest to the diverter. not on the dhw side. this would be pushing the diaphragm towards the dhw side if you get me.
Sponsored Links
Yea that wont be helping!
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
